It'll be fun to see what it can handle!
We will see how much these junkyard bottom ends hold. Big bang theory ls and afew other articles have proved this shooting for 1200 hp is not out of the question. We gapped the rings and have done plenty of research wouldnt be wastin my time on it if i wasnt sure about the setup if the rods and pistons dont i do have plan b and c...
Andy Fangman
F1X Procharged LS1 Foxbody Mustang
4.86 147mph
http://www.youtube.com/user/skipdownstairs
It'll be fun to see what it can handle!
1989 Mustang 408W TT Built by me. Sippin Corn cocktails. 721hp 765TQ on 10lbs
2004 Subaru Forester XT 5spd
1979 Yamaha XS 1100, 70's goodness.
Looks like a later model 5.3 so at least it's got a little better rod in it
02' TT Z06
00' Audi S4
02' Tundra
02' Honda Superhawk slow, but sounds fast
Good eye slowride. Yeah the 06 on up for sure and some late model 05s have the floater pistons and powdered rods (dimple rods) We went down that road with about 4 engines tryn to figure out what is and isn't the blocks are differnt also older engines have a few longer head bolts as well. Were just waiting on afew things from Jason Lee and should be dyno time shortly.
Andy Fangman
F1X Procharged LS1 Foxbody Mustang
4.86 147mph
http://www.youtube.com/user/skipdownstairs
Cool build man, what fuel you running with it? Seems stock bottom is asking for trouble but you guys know way more about the LS stuff than I do. A engine diaper wouldnt be a bad idea to keep the fluid off the tires
Thanks Scott were going to be running methanol with a 990 Enderle pump and Moran 500 lb injectors and yes for sure an engine diaper might even take some 5 gallon buckets with us to the dyno to take parts home in
Andy Fangman
F1X Procharged LS1 Foxbody Mustang
4.86 147mph
http://www.youtube.com/user/skipdownstairs
Will jason lee be tuning this?
"Faith makes things possible not easy" -o-
He said hes going to be close to the phone while its on the dyno but were handling all the tuning
Andy Fangman
F1X Procharged LS1 Foxbody Mustang
4.86 147mph
http://www.youtube.com/user/skipdownstairs
Where you gonna dyno this?
"Faith makes things possible not easy" -o-
Kelly Motorsports dyno in Manchester
Andy Fangman
F1X Procharged LS1 Foxbody Mustang
4.86 147mph
http://www.youtube.com/user/skipdownstairs