Re: fuel injector question
What are you going to be tuning the car with? How much power are you going for?
Once again do not select things in referance to boost. Please Please stop using this concept. It annoys me very much.
-Trevor
Re: fuel injector question
ill only have an SAFCII, ill be paying someone to tune.
for now im going for 300-350 RWHP at 10psi.
sorry trevor, please excuse my ignorance. i want to understand this shit, but im more of a look and listen to learn, not so much read a bunch of stuff that goes completely over my head and try to get some useful info out of it. sadly, the only thing i am using to reference parts is by looking at what other people have used, finding out what there weak points are/where then trying to kinda get the best from each and put it all together. ive read tons and tons of info, but i dont really remember/comprehend much of it. i need to hang out with people who actually know what they're talking about and have actually built systems and such.
Re: fuel injector question
i believe the stock flow rate is like 22.5 lb/hr
and the engine is rated @ 220 BHP
Re: fuel injector question
What kind of injectors does your car run? High/Low impendence? Peak and hold? Dsm Injectors might work but of course you will need 6 of them. Whatever you car has you will need to wire in resistors if you were to use the other type of injector.
Re: fuel injector question
WOW? i really have no frikkin idea, ill tell you the little bit i do know.
the short block is from a 1993 lumina Z34 (3.4L TDC, VIN X)
the heads are P&Pd from the same car
cam carriers are newer, better versions from 94-95 monte carlo (same engine)
using 94-95 (monte) ECM and wiring harness
so i guess they are whatever the 91-95 lumina Z34, 94-95 mont, 91-93 cutlass, 91-93 GTP etc. i do know that most people use 42# mustang injectors without any resistors, but wether they are high/low im not sure.
WHERE THE HELL CAN I FIND THIS STUFF OUT AT????
Re: fuel injector question
Have you actually heard of people running a resistor in series with a peak and hold injector to make it compatable with a saturated type ECM?
FYI: your factory ECU should be saturated - you need High impedance injectors which the 42# ford SVO injectors are compatable.