___SOME DSM PARTS___

[Drifte]

7 bolt AWD fylwheel, just pulled from car $25
6bolt AWD flywheel, just had resurfaced, $50
7bolt engine, came out of running car unknown miles etc, $150
FP Intake, just doesnt fit my turbo well $50 (has bov recirc)
Complete head from non turbo dsm (just different cams) $70
good 14b hot side no cracks $25
couple fuel rails, tps, cas
2g rods and pistons $40

...lots of extra oem parts just ask if your looking for something.

Honda H-brace by Megan racing. Blue In color for any ed-ek civic. $30
Honda ek type-r type front upper strut bar $5

Like I said lots of parts, just ask if not listed.

[Sean485]

Is the flywheel for a NT?

[Drifte]

edited list

[oVa-Boost]

Would you happen to have a stock lower intercooler pipe the one the goes from the 14b turbo on the 1gs to the intercooler im looking for one of them.

[Drifte]

I do not sorry, gave that away with the shell.
contact Bryan at
http://www.4g63power.com/
Pretty much guarantee he has what your looking for.

[CiViC-Wanted]

is there couplers on the FP intake or not?

[Drifte]

I do have couplers, but those cost more than the intake itself (at this price). PM me if you need anything.

[Luminatorz34]

colt, is the 7bolt motor the one that came out of yourr and my old talon? the one with the snapped flywheel bolts? or is this a different one? what all is included?

[Drifte]

This is another 7bolt, i threw the one in the trash from the maroon talon...well I recycled it.

[Luminatorz34]

what all is included in the 7bolt? is it just a bottom end or what?

[Drifte]

Yeah I have another head forsale. Its pistons to oil pan on the 7bolt.

[belittle]

Is the flywheel for a NT?

Sean,

I have a NT 7 bolt 4g63 car sitting at my shop. I can pull the trans and sell you the flywheel and clutch for 50 bucks or you can come down and pull it yourself for 20. Give me a call if you want it.

[Luminatorz34]

can i get pics of the intake, and also the head colton? thanks

[Drifte]

both are in my parents garage. The intake manifold came off of my maroon talon. The head came off my nt green talon I used for parts. It ran, but sold the valve cover and quickly stripped it so...I never did drive it. I was planning to someday take that head in and have it cleaned up and built.

[DustinsDuster]

got any stock or nearly stock injectors?

[Drifte]

I may have some 450's from my last car still. I will have to check, if your in any hurry though...I'd get ahold of blittle. Im a ways away from the storage.

[DustinsDuster]

i'll probably put out the call when i get the engine back- i havent checked on him in a week or two- not sure if he got it assembled or not.