This is what "Anti-Lag" will do to intercoolers

[Ninesecsnake]

So when I raced the evo here in Sioux Falls my car seemed very laggy, but its hard to tell when im down 200-300hp. I made a trip out to the local track and couldnt get it to make a clean pass even on 8lbs of boost, to make it run right I had to pull a ton of fuel(30%), so this led us to thinking we had a boost leak. I'll let the pictures explain.

Drivers side intercooler:
http://pic20.picturetrail.com/VOL144/2065813/4006000/321748300.jpg
http://pic20.picturetrail.com/VOL144/2065813/4006000/321748309.jpg

and because it also broke the core we had to build a new one:
http://pic20.picturetrail.com/VOL144/2065813/4006000/321748319.jpg
http://pic20.picturetrail.com/VOL144/2065813/4006000/321748316.jpg

Now here is the best part, Excessive Autosports ordered the core yesterday, and I have a completed intercooler today. You tell me what shop anywhere else in this area has customer service like this. Thanks Joey, I really appreciate it!

[Drifte]

probably none, but which shop did do it?!

thats pretty impressive, blowing the welds on the intake manifold, i mean intercooler...hehe

[DustinsDuster]

thats some crazy shit. breaking nice clean welds like that is a shame though...

[Ninesecsnake]

probably none, but which shop did do it?!

thats pretty impressive, blowing the welds on the intake manifold, i mean intercooler...hehe

Excessive Autosports here in Sioux Falls fabricated the new intercooler, it was a copy of the original left side intercooler that they built 2 years ago.

I had to overnight parts from Japan, but its all good now :biggrin: . It pulls so hard, back to the way it used to be. Boost it good!

[Mufflover]

That is wild shit there.

[90 notch]

You guys should have welded on some aluminum straps for the corners.Steve o

[Drifte]

^mmm nice avatar. but yea seems like they could weld a small elbow/strap to create strength in the middle of those long sections. idk if I make any sense, impressive car though.

[Ninesecsnake]

You guys should have welded on some aluminum straps for the corners.Steve o

That would keep the tanks together, but it also broke the core itself. I talked to a few racers and they all have problems breaking a/w intercooler cores using anti-lag.

[Urban Legend]

Guess you just need to de tune a little bit. Pretty impressive Ryan!

[Stang5oh93]

I made a trip out to the local track

I'm assuming your local track is Marion? I know a guy that raced there on a regular basis.

On another note, I can't wait to see you car in person!