PDA

View Full Version : Turbo Z



30lbsboost
05-31-2008, 07:27 PM
Started the tub job today, the tire is almost where it needs to be. Also need to radius the bumper cover...this is a big frigging tire, lol!

car will have full tubs and stock style suspension

315/60/15 MT Drag Radial

heres a few pics

TbTalon94
05-31-2008, 08:21 PM
FINALLY not a picture of the damn turbo!!!

Looks good man :bigthumb:

30lbsboost
05-31-2008, 08:31 PM
FINALLY not a picture of the damn turbo!!!

Looks good man :bigthumb:

Thank you

It took a wile to figure out what wheels to get, I guess i'm too picky...lol

OldSkoolRCR
05-31-2008, 09:20 PM
Very Nice.

allgo
05-31-2008, 10:07 PM
Looks good scott, when do you think it will be done? this year?

30lbsboost
05-31-2008, 11:03 PM
Looks good scott, when do you think it will be done? this year?

Thanks again everyone

Yes on the car for sure! Plan on building the engine this fall.....the hold up could be the transmission.

DustinsDuster
06-01-2008, 10:20 AM
is that where the wheels are going to sit when done? it looks good, but personally i love seeing the tire all the way inside the wheel well. just me though.

30lbsboost
06-01-2008, 01:48 PM
is that where the wheels are going to sit when done? it looks good, but personally i love seeing the tire all the way inside the wheel well. just me though.

they are all the way inside the wheel well, the sidewall is resting against the wheel well lip right now, have to cut it off. In the end the tires will be 1" tucked from the sheet metal.
the pics don't do it enuf justice

30lbsboost
06-01-2008, 02:01 PM
some better pic's of the tire tuck....

Domestic Disturbance
06-02-2008, 01:11 AM
that looks absolutely sick i love it

30lbsboost
06-02-2008, 07:49 PM
that looks absolutely sick i love it

Thanks,

I plan on fiinishing cutting everything out this week, so I can get an overall measurement for RE Action Fabrication, to get the 9" housing finished. Building the Rearend housing is one of the very few things that I won't be doing myself, cause I don't have a jig for it.
Then its time to build the tubs and start bending bars for the cage :supz:

30lbsboost
06-09-2008, 07:45 PM
well, here are a few more pics with the wheels all the way in, plenty of room now to set the car at any ride height. This is the largest width tire that will fit in a stock style suspended f-body... but I have lots of room to go with a taller tire later if need be, I had to cut the frame rails down about 2". The panhard rod bracket was cut down about 1" and the lower hole was cut off to clear the tire(that will be refabbed later)
The tubs will go all the way up to the well on the hatch.
Also a after pic of the driverside.

The electrode on my plasma cutter wore down ( and I did not have anouther one at home!) during the job.
thanks to Lee for bringing over his plasma cutter. :WORSHIP:

OldSkoolRCR
06-09-2008, 09:03 PM
Very Nice.

StreetSweeper
06-11-2008, 09:37 AM
:WORSHIP: :WORSHIP: :WORSHIP: :WORSHIP:

30lbsboost
06-11-2008, 08:19 PM
:WORSHIP: :WORSHIP: :WORSHIP: :WORSHIP:

Ok then , your cars next! :bigthumb:

Stang5oh93
06-12-2008, 10:58 AM
Lookin' good.

Domestic Disturbance
06-12-2008, 01:20 PM
you could use those tires to raise someones house in this flood

30lbsboost
06-14-2008, 08:20 PM
you could use those tires to raise someones house in this flood

if it would have helped, i would have used the entire car.

30lbsboost
06-16-2008, 06:12 PM
My car is having anouther birthday next week......MORE presents are on the way!!! ....HAHA!!!!

Domestic Disturbance
06-17-2008, 01:55 AM
i hope they drop them off up the street instead

30lbsboost
06-17-2008, 05:15 AM
:neener:

30lbsboost
06-17-2008, 08:29 PM
I decided to rethink the rearend houseing on the car yesterday, So I made a phone call.
So I'll let the cat out of the bag on this part of the car.

ever hear of madman and bradys car?
the worlds fastest stock suspended f-body 7.43@188mph!
hear of 6-speeds inc?
the fastest 6-speed f-body
how about late model racecraft?
the quickest and fastest LS1 on stock suspension

Now I have the same rearend houseing and suspension setup these guys all have, and I also have shop support for the suspension on my car, from madman
I have to say this is very exciting for me, things are really comming together.

thanks to:
Madman
Burkhart Chassis
Wolf raceraft

DustinsDuster
06-17-2008, 09:27 PM
i havent heard of any of them; but congrats. sounds like you have your work cut out for you.

30lbsboost
06-24-2008, 05:07 PM
i havent heard of any of them; but congrats. sounds like you have your work cut out for you.

Thanks .....well, I still have to do the work, but they did all the r&d and will help with tweeking the suspension. But having the right parts is a good place to start!

Drifte
06-25-2008, 08:50 PM
wow sounds like your really getting in with the right people. Im not familiar with those guys, but if its anything like talking to Shep, brent, dan etc for the dsm guys than you sound to be set.

...keep the pics coming

30lbsboost
06-26-2008, 09:25 PM
thanks......I'll try to keep the pics coming, And i'll try to keep the $$'s coming in to keep this project going, cause it's costing a ton on cash..lol!

30lbsboost
07-02-2008, 07:26 PM
My Burkhart 9" housing came today, the quality is second to none.
This thing is Bad Ass !

Heres some pics

on a budget
07-03-2008, 02:29 PM
gotta love fabricated rear ends with stock susp!