I've been gone...Check this shiznit biznit

[lenny]

Master cylinder off a 2007 RS4 (bigger better braking)
http://photos-071.ak.facebook.com/ip002/v71/136/81/71803328/n71803328_31003071_4836.jpg
New up-pipe for left bank
http://photos-072.ak.facebook.com/ip002/v71/136/81/71803328/n71803328_31003072_5146.jpg
Where'd my mechanical fans go????oh yeah, I fuckin removed the hp robbin bastards
http://photos-075.ak.facebook.com/ip002/v71/136/81/71803328/n71803328_31003075_6059.jpg
Right bank up-pipe....incase you haven't noticed I painted my vavle covers 'wrinkle red"
http://photos-070.ak.facebook.com/ip002/v71/136/81/71803328/n71803328_31003070_4517.jpg
Like my new glasses???no....then FUCK you!!
http://photos-076.ak.facebook.com/photos-ak-sf2p/v73/136/81/71803328/n71803328_31003076_362.jpg
Think your car is low???? I kicked it down a notch for spring....BAM!!!!
http://photos-078.ak.facebook.com/ip002/v71/136/81/71803328/n71803328_31003078_6960.jpg
BAM BAM!!!!
http://photos-079.ak.facebook.com/ip002/v71/136/81/71803328/n71803328_31003079_7258.jpg
see what's not stock here????no???I added chrome gauge cluster rings from a new B6 S4....looks money..
http://photos-074.ak.facebook.com/ip002/v71/136/81/71803328/n71803328_31003074_5765.jpg
Sorry for all the crappy camera phone pics...don't like them??? Stick your thumb in your ass and cough.
-Dan

[lenny]

Oh, and for you folks that have been wonderin what else I've been up to (insert your name here) here ya go
Me and some buddies (all love their cars tight and their women loose)
http://photos.pe.facebook.com/v71/136/81/71803328/n71803328_30999808_5527.jpg
http://photos.pe.facebook.com/v71/136/81/71803328/n71803328_30999809_5814.jpg
Throwin down for north east Marion .....bitch
-Dan

[DragonUSMC]

d00d your glasses are the coolest!!

[lenny]

d00d your glasses are the coolest!!


Actually they've gotten me laid...IF zero is a number
-Dan

[DustinsDuster]

hey, i know every guy in those pics of you. Marion Represent...

[JustinS]

Car is looking good Dan.

[lenny]

Washed my car today and mowed the lawn. I haven't clay/polished/waxed yet this is just after the wash.
http://photos-233.ak.facebook.com/photos-ak-sf2p/v73/136/81/71803328/n71803328_31004233_9877.jpg
http://photos-234.ak.facebook.com/photos-ak-sf2p/v73/136/81/71803328/n71803328_31004234_153.jpg
http://photos-235.ak.facebook.com/photos-ak-sf2p/v73/136/81/71803328/n71803328_31004235_423.jpg
http://photos-236.ak.facebook.com/photos-ak-sf2p/v73/136/81/71803328/n71803328_31004236_684.jpg
next step
http://photos-237.ak.facebook.com/photos-ak-sf2p/v73/136/81/71803328/n71803328_31004237_985.jpg

[JJ240]

Go lower its still not tucking tire!

[DustinsDuster]

Go lower its still not tucking tire!

maybe he lives in a place like you with speed bumps, and doesnt want to deal with the stuff you dealt with; no matter how badass it looks...

[boxmakingman]

then move somewhere else

its still not low

[lenny]

Right now I'm sitting 24.5" fender to ground in the front and 25 in the back. 25.5 all around is the manufactures specs (H&R) to keep suspension dynamics in acceptable positions. By going anylower I'm degrading handling characteristics
-Dan

[Drifte]

yeah and it looks good. but shouldnt come in saying "you think your low" theirs some low rider guys on here, and boxmaking man enjoys a slammed ride as well.

i like your ride height, pretty much what i want all my cars sitting at, tire level with fender.

[lil krumm]

my truck is tucking more tire than your car....

[boxmakingman]

what the fuck does it matter how it handles?

its not a race car.

go lower.

or come to the understanding that its not low.

[Domestic Disturbance]

i think hes more worried about performance/comfort than just "tucking tire". i think it looks way good

[lil krumm]

i think hes more worried about performance/comfort than just "tucking tire". i think it looks way good


then he shouldnt say shit about it being low, cause its not that low.

[rolnlow]

my truck is tucking more tire than your car....

my truck tucks more the both of you. but the car sick the way it is

http://www.iowaminitruckinassoc.com/Justin_files/In%20Driveway2.jpg

[lil krumm]

[quote="lil krumm";p="124789":0b3f4]my truck is tucking more tire than your car....

my truck tucks more the both of you. but the car sick the way it is

http://www.iowaminitruckinassoc.com/Justin_files/In%20Driveway2.jpg
[/quote:0b3f4]
your also on bags. but that doesnt matter cause your truck is amazing.

[Stro]

SLAM IT ON ITS NUTS!!!!

[Ricky]

its got bigger nuts then you know

[lenny]

what the fuck does it matter how it handles?

its not a race car.

go lower.

or come to the understanding that its not low.

#1... Why put on 1200 dollar coilovers if you're just going to destroy your handling? If I wanted low I would have gone low class spring cutting...No thanks. I like to drive my car the way it was meant to be driven. It sees autox a few times a year. As mentioned before the suspension dynamics get totally ruined when I go lower than this. I'm already running -1.7 degree camber in the front. That's just about right for what I use it for. I raise the car up a bit in the winter so that I have more ground clearance.

#2... not really, i don't have the time to "race" on a circuit. I do go to track days on occasion and as said before I go to auto X every once and awhile. If I wanted a full out race car I would have bought an Evo. It may come to that once I get out of college. Hell for all I know I may turn this thing into a race car once out of college and depending on bank role put it into a speed world challenge (not likely because I wouldn't have the experience/sponsorship) but it's really not the best platform to do that on.

#3 I understand that it's not "low". However, the car is not a low rider and I never said it was meant to be a low rider. All i said was, think your car is low???? i kicked it down a notch meaning to say I lowered the suspension. Don't take it personally.

If you want to get into a power (nuts) discussion let me know.
-Dan

[lenny]

Oh, and lastly, in my personal opinion it's not cool to smash up oil pans on turbo cars
-Dan

[Ricky]

thats why i didnt go any lower. i want to keep my oil pan and i live were there are big ol speed bumps.

[Drifte]

turbo or non turbo, doesnt seem like a good idea to me...thats why i have an h brace :)

[lenny]

I can get an aluminum skid plate to replace my plastic one but i don't want to risk it. My oil cooler sits just as low as my oil pan and my oil level sensor also sits at the low point of my oil pan...if I had a car that was cheap to fix i'd probably do it just for looks and raise it up on track days
-Dan

[Domestic Disturbance]

u wanna c low look at my car. fucker is slammed!

i think u can fit a popcan between my rear fender and tire.... HOORAY fbody

[black88gt]

being extremely low looks like shit on most cars. and tucking tire looks retarded when you have rubber band tires and huge rims. "tucking tire" only looks good if its some bias plys on the back

looks good dan, leave it where it is

[Drifte]

I can get an aluminum skid plate to replace my plastic one but i don't want to risk it. My oil cooler sits just as low as my oil pan and my oil level sensor also sits at the low point of my oil pan...if I had a car that was cheap to fix i'd probably do it just for looks and raise it up on track days
-Dan

hey remember im not sayin lower it at all. my car sits as stock as the day it rolled out. cant be to protective imo. I'd stick a aluminum skid plate on their anyway, looks cool, protects well.

[lil krumm]

being extremely low looks like shit on most cars. and tucking tire looks retarded when you have rubber band tires and huge rims. "tucking tire" only looks good if its some bias plys on the back



but then your tucking rim. so thats even cooler. im not stopping till i start tuckin luck nuts......

[black88gt]

meh, small rims with big tires for me. JMO, lowered cars and trucks arent really my thing, but to each his own.

[Domestic Disturbance]

when i start to tuck tire, i want it to b when im launchin off the line! hells ya

[Stro]

[quote="black88gt";p="125316":5c1bf]
being extremely low looks like shit on most cars. and tucking tire looks retarded when you have rubber band tires and huge rims. "tucking tire" only looks good if its some bias plys on the back



but then your tucking rim. so thats even cooler. im not stopping till i start tuckin luck nuts......[/quote:5c1bf]

You'd better be fuckin low, or i'm gonna have to replace you lil krumm.

[lil krumm]

[quote="lil krumm";p="125322":13444][quote="black88gt";p="125316":13444]
being extremely low looks like shit on most cars. and tucking tire looks retarded when you have rubber band tires and huge rims. "tucking tire" only looks good if its some bias plys on the back



but then your tucking rim. so thats even cooler. im not stopping till i start tuckin luck nuts......[/quote:13444]

You'd better be fuckin low, or i'm gonna have to replace you lil krumm.
[/quote:13444]

you cant exactly lay frame like me. shit im laying door handles before im done!!!

[Ricky]

he may be going low in a bit. stro be low.... i hope

[lil krumm]

he may be going low in a bit. stro be low.... i hope


he maybe going low, but he aint gonna be slammed.

[Ricky]

remember what happend when you came to my house kent? we slamed your frame on my speed bump. that damn chunk of asfalut is why i am still too high. what stros thinking is no mild drop...

[TbTalon94]

being slammed in Iowa is pointless



/thread

[lil krumm]

being slammed in Iowa is pointless



/thread


only pussies cant ride slammed.

and eric that was my exhaust that hit not my frame. my y-pipe is the lowest thing right now, and i dont have the $200 for a new one.

[Ricky]

did we bend it? cuz we hit fucking hard. ahahhaha.

[Drifte]

its bent all up. need to make a new one soon. but if the v6 is goin than no point in that.

[lil krumm]

its bent all up. need to make a new one soon. but if the v6 is goin than no point in that.


y-pipes are the same for v8 and v6. if i had money that v6 would be long gone.

[black88gt]

[quote="TbTalon94";p="125446":5f47d]
being slammed in Iowa is pointless



/thread


only pussies cant ride slammed.

and eric that was my exhaust that hit not my frame. my y-pipe is the lowest thing right now, and i dont have the $200 for a new one.[/quote:5f47d]

lol its so hard to drive a vehicle thats extremely low with rougher suspension than a horse carriage :roll:

[bowtiebuba]

you should see seths car the fender bottoms out on the tire its nuts

[lil krumm]

you should see seths car the fender bottoms out on the tire its nuts


seth as in the one with the black gs-t? cause ive been wantin to make it up to his shop some time but never have.

[lil krumm]

lol its so hard to drive a vehicle thats extremely low with rougher suspension than a horse carriage :roll:


who said anything about the ride being rough? some are, and thats why pussies cant ride slammed cause it makes their vag hurt to ride in it.

i wouldnt say my ride is rough, only if it is being driven on roads it shouldnt be driven on.

[lenny]

[quote="black88gt";p="125464":6fda8]

lol its so hard to drive a vehicle thats extremely low with rougher suspension than a horse carriage :roll:


who said anything about the ride being rough? some are, and thats why pussies cant ride slammed cause it makes their vag hurt to ride in it.

i wouldnt say my ride is rough, only if it is being driven on roads it shouldnt be driven on.[/quote:6fda8]

I was gonna have a smart ass comment there about the "Vag" hurting but to be honest, I'd give you an AWD launch with about 420 whp behind it and you'd more than likely shit your pants regardless of what gender you are....end of story
-Dan

[lenny]

[quote="black88gt";p="125464":10a1c]

lol its so hard to drive a vehicle thats extremely low with rougher suspension than a horse carriage :roll:


who said anything about the ride being rough? some are, and thats why pussies cant ride slammed cause it makes their vag hurt to ride in it.

i wouldnt say my ride is rough, only if it is being driven on roads it shouldnt be driven on.[/quote:10a1c]

BTW, if that's your truck in your sig it's pimp as shit...What's the details? I read up on the 6 cly thing...What else do you have in it? I'd like to know. You need any detailing done (buffing, polishing, swirl mark removal)? UPS just delivered 500 dollars worth of pads (different cutting, finessing, etc), polishes, and waxes today
-Dan

[lil krumm]

I was gonna have a smart ass comment there about the "Vag" hurting but to be honest, I'd give you an AWD launch with about 420 whp behind it and you'd more than likely shit your pants regardless of what gender you are....end of story
-Dan



i really doubt it......i've been through a lot car wise. it takes a lot to make me shit my pants. for example last night i was bouncing along sideways at around 50mph through 2ft deep ruts with random wholes all over on a level B road clear out in bum fuck Iowa. thats the only time i have been scared recently while riding with some one.

and thats not how my truck looks. thats a old ps'd pic. new pics should be up later today so that you guys can talk shit about my ride.

[lenny]

and thats not how my truck looks. thats a old ps'd pic. new pics should be up later today so that you guys can talk shit about my ride.

Sweet, lol. Looking forward to it
-Dan

[Drifte]

with the old steelies. a teaser...

[Ricky]

weeeeeeeeeeee

[lil krumm]

now ima go back to sears and see if ron says my tires are worn out lol