PDA

View Full Version : Make sure your air filter can handle the turbo/supercharger



AutoMods
02-21-2014, 11:02 AM
customer of ours sent us this picture

http://i1081.photobucket.com/albums/j349/automodsllc/1dcc4682-74d4-4457-bd52-be7d3299beb3.jpg?t=1393005614

Phish
02-21-2014, 11:14 AM
What filter was that ?? and what exactly happened here??

JacobS
02-21-2014, 11:48 AM
looks like a filter collapsed structurally and got sucked in. vtec must have kicked in

85XR7Project
02-21-2014, 04:49 PM
I assume it wasnt moving enough CFM for the turbo and was pulled in?

slow ride
02-21-2014, 04:54 PM
Is that a billet wheel? Any idea of the filter used Ryan?

Deimos
02-21-2014, 06:03 PM
I was planning on using a screen mesh

AutoMods
02-21-2014, 06:51 PM
i'm waiting for an email reply on what filter he was using. it was a cast wheel. i'm guessing it was a knock off filter and undersized and couldn't handle the vacuum

also vibrants normal filters can be used with turbos but their filters with filtered end caps (pictured below) are not approved for turbos

http://vibrantperformance.com/catalog/images/categorylanding/images/lp_openfunnelfilter.jpg

85XR7Project
02-21-2014, 10:29 PM
Thats a hell of a hard way to learn that I guess.

Phish
02-21-2014, 11:57 PM
I have been looking at air filters to buy for my turbo setup. From what i have read quite a few people are running the cheap spectre filters from autozone on high horse cars. That... scares me... lol

BGjohnson
02-23-2014, 03:23 PM
I'm rocking them on my twins!

Only size I could find to fit it with my weird placement. Either that or screens, and I won't be doing that anytime soon

AutoMods
02-23-2014, 06:00 PM
customer replied and says he was running a k&n filter ! no further info on what style k&n it was