PDA

View Full Version : Question of wheel fit



Ketchacar
12-26-2013, 02:37 PM
Before I get too far into this, have a question since they are not close by.
Will a set of Mustang wheels, mag style, for a 2007 to 2009 Mustang fit on a 77 Ford Ranchero?
Is the spacing enough, they are 16's, but not sure if the bolt pattern will work.
All help is appreciated.

FiFdYnUtZ
12-26-2013, 03:18 PM
I cant answer your question for sure but I have a set of black california special 18s for sale of an 08 if your in the market

Ketchacar
12-26-2013, 03:54 PM
Thanks, but the set I am looking at are just what I want to put on my red 77 Ranchero. It has a new set of Weld style wheels, but don't give the look I am looking for.1570 ​I'll put these up for sale later, they don't have 500 miles on them.

Ketchacar
12-26-2013, 03:54 PM
Thanks, but the set I am looking at are just what I want to put on my red 77 Ranchero. It has a new set of Weld style wheels, but don't give the look I am looking for.1570 I'll put these up for sale later, they don't have 500 miles on them.

AutoMods
12-26-2013, 11:36 PM
find out the bolt pattern on the ranchero and the desired offset or backspace you want . the 07 mustang uses a 5x114.3 bolt pattern. can't remember the offset but it should be easy to find online

The Laser
12-27-2013, 11:36 AM
5x4.5 which works out to 5x114.3 so the pattern should work. The wheel offset should be stamped on the inner part of one of the wheel spokes.