83s10v8
11-13-2013, 09:37 PM
http://www.flickr.com/photos/107975999@N08/10847537385/
http://www.flickr.com/photos/107975999@N08/10847542555/
http://www.flickr.com/photos/107975999@N08/10847613426/
http://www.flickr.com/photos/107975999@N08/10847699324/
http://www.flickr.com/photos/107975999@N08/10847704574/
http://www.flickr.com/photos/107975999@N08/10847564815/
Jesel Sportsman Shaft Mount Rocker Arms for Dart Pro 1 Heads, 1.5 ratio, great condition, comes with rockers, stands, shims, all bolts and hardware, brand new this spring, 20 runs on them. $1100 new, asking $700
http://www.flickr.com/photos/107975999@N08/10716765463/
http://www.flickr.com/photos/107975999@N08/10716771683/
2004 Pontiac GTO M12/T56 6 Speed Transmission, 67k Miles on just the Transmission. ONLY 1,000 Miles on; Monster Stage 3 Clutch (good to 700rwhp), Billet Flywheel, Throw Out Bearing/Slave Cylinder, Tick Adjustable Master Cylinder, Tick Speed Bleeder. Pedal, Reservoir, Short Throw Shifter Included. $2850obo
Also have a GForce 1320 Aluminum 3.5" 1 Piece Drive shaft, With Adapter Plate, and all hardware for sale for a 04-06 GTO. $400obo
* Will Package Deal Whole Transmission Set up and Driveshaft for $3000obo
http://www.flickr.com/photos/107975999@N08/10716682913/
Callies Compstar 3.875 Stroke Crank, 350 Mains, 2.100 Journals, Forged 4340, $804 New from Summit Racing, Crank has 25 Runs, looks like new, great shape, ready to go, asking $600obo
http://www.flickr.com/photos/107975999@N08/10716566045/
http://www.flickr.com/photos/107975999@N08/10716662366/
http://www.flickr.com/photos/107975999@N08/10716574555/
http://www.flickr.com/photos/107975999@N08/10716579325/
Pro Systems 1050 Alcohol Dominator, Cost over 1300 to Build, Has the Big Jets (200/210/220). Carb was only run for about 10 Runs, I have the complete Build Sheet, Very Nice Carb, no Problems at all, Comes with fuel line and pressure guage, Asking 850obo
http://www.flickr.com/photos/107975999@N08/10716556496/
http://www.flickr.com/photos/107975999@N08/10716759243/
Pro Comp Electric Water Pump for a SBC, Works Great, Nothing Wrong With It. Maybe 25 Miles on it Total. Was on a Drag Truck. Going to an LSx Set up. No Need for it, Need it gone. Asking $80obo
http://www.flickr.com/photos/107975999@N08/10716612264/
http://www.flickr.com/photos/107975999@N08/10716819433/
Icon Performance Forged Pistons for a 421. Part # IC965-030, 4.155 Bore, 1.5/1.5/3.0mm Rings, 14.1 Compression with 64cc Heads, Pistons are like new, Rings in great shape, 20 Runs down the race track, new they are $800 Asking $450 obo
http://www.flickr.com/photos/107975999@N08/10716617716/
http://www.flickr.com/photos/107975999@N08/10716529005/
Callies Compstar 6.0 Forged Rods SBC, Rods in Great shape, Part #A6000DS2A2AH. Maybe 20 Runs on them total, ". Asking $425obo
http://www.flickr.com/photos/107975999@N08/10716529005/
Hedman Husler Fenderwell Headers for a V-8 S-10. Part #65857. $660 Brand New from Summit Racing. Cermashine Lifetime Warranty Coating Cost me $225. Headers are like new and in great shape. Comes with Stahl Pattern Plates, and all the hardware, Asking $600obo
http://www.flickr.com/photos/107975999@N08/10716677206/
http://www.flickr.com/photos/107975999@N08/10716664234/
http://www.flickr.com/photos/107975999@N08/10716667244/
Dart SHP Block, Bored .030 over @ 4.155. 350 Mains, New they are 1600, Then about 500 worth of machine work,has 20 runs down the dragstripe on it. Has studded 4 bolt splayed caps. Cylinders look great, Cam bearings look new. Block was brand new in April 2013 asking $1300obo
http://www.flickr.com/photos/107975999@N08/10847715854/
http://www.flickr.com/photos/107975999@N08/10847640436/
Holley 650cfm Double Pumper Carb, doesnt have Choke Tower, Currently powering a Carb'd LS1, older carb, but works great, asking $200obo
http://www.flickr.com/photos/107975999@N08/10716704063/
- Comp Cam Custom Ground Roller Cam & PBM Roller Lifters, good shape, have about 20 runs on it. - $350
http://www.flickr.com/photos/107975999@N08/10716532956/
http://www.flickr.com/photos/107975999@N08/10716536616/
- Comp Hi Tech Push Rods PN# 7974 Chromoly Pushrods have about 20 runs on them- $75
http://www.flickr.com/photos/107975999@N08/10716554895/
http://www.flickr.com/photos/107975999@N08/10716636974/
- Canton S-10 Swap Oil Pan w/windage Tray great condition. only on my motor for 6 months, comes with flexible braided dipstick, Melling HV-55 Oil pump, and pickup- $175
http://www.flickr.com/photos/107975999@N08/10847707576/
http://www.flickr.com/photos/107975999@N08/10847713176/
- Pro Comp Shootout High Rise Intake, port matched to a 1206, runners lined up better than my high dollar dart intake. Comes with 12pt bolts $100
http://www.flickr.com/photos/107975999@N08/10716533324/
- Stock Chrome Oil Pan 5qts, Great shape, Brand New, Never been Used, $40
http://www.flickr.com/photos/107975999@N08/10847680026/
http://www.flickr.com/photos/107975999@N08/10847686056/
- GM 10 Bolt 8.5 Ring Gear, 3.42 Gear, out of a 01 GMC Sierra, Great Shape $75obo
http://www.flickr.com/photos/107975999@N08/10847923423/
http://www.flickr.com/photos/107975999@N08/10847928963/
- True Dual Roller Billet Timing Chain with locks & bolts, Looks Brand new, asking $75
http://www.flickr.com/photos/107975999@N08/10847581195/
http://www.flickr.com/photos/107975999@N08/10847731704/
- Chrome Timing Cover, Brand New, Never Installed, $10
http://www.flickr.com/photos/107975999@N08/10847680026/
http://www.flickr.com/photos/107975999@N08/10847686056/
- Stock Timing Cover, Fabbed For Roller Cam Button, $10
http://www.flickr.com/photos/107975999@N08/10847680026/
http://www.flickr.com/photos/107975999@N08/10847686056/
- Aluminum Tall Valve Covers, comes with studs, and breathers, baffled, shine up really nice $40
http://www.flickr.com/photos/107975999@N08/10847773204/
http://www.flickr.com/photos/107975999@N08/10847779604/
- QA1 pn# BAR350K, T-Bar Mounts for shocks, I have the pair, still in package, never used. $20
http://www.flickr.com/photos/107975999@N08/10847679144/
- 14x5 One Piece Dry Air Filter, Like new condition, $50
http://www.flickr.com/photos/107975999@N08/10847668116/
http://www.flickr.com/photos/107975999@N08/10847755884/
- ARP Head Studs for SBC, Only Torqued once, Studs, 6pt Nuts, Washers, Like New, $100 (Pictured in top photo)
- MSD Complete Ignition. Pro Billet Distributor, 6AL Box, Blaster 2 Coil and bracket, MSD 8.5mm Wires all work great! 20 runs down the track is all!- $400 (Pictured in top photo)
- RCI 15 Gallon Fuel Cell, No sending unit, nice cell, doesn’t leak, $75
-- TCI Heavy Duty SFI 29.1 Flexplate SBC 163 Tooth, Great Shape, comes with ARP Bolts, asking $40 (Pictured in top photo)
- Mr Gasket 2” Aluminum Carb Spacers, for 4150 flange, one is ported, one is stock, asking $15ea (Pictured in top photo)
- Moroso Aluminum 4150 to 4500 Carb Adaptor Plate, 2” tall, 4150 Intake side, 4500 Dominator carb side, like brand new asking $40 (Pictured in top photo)
- Billet Swivel Water Neck, Nice, with allen bolts, O’ring in good shape $10 (Pictured in top photo)
- Dominator Air Cleaner Base, Brand New, $15 (Pictured in top photo)
- Jegs Low Mount Alternator Bracket, Drivers Side, Chrome, Like New, $10 (Pictured in top photo)
- Billet HEI Distributor, Not sure on brand, Delco Cap, worked great when pulled, $25 (Pictured in top photo)
- Howe Aluminum Radiator 16 x 27.5- $100
http://www.flickr.com/photos/107975999@N08/10847542555/
http://www.flickr.com/photos/107975999@N08/10847613426/
http://www.flickr.com/photos/107975999@N08/10847699324/
http://www.flickr.com/photos/107975999@N08/10847704574/
http://www.flickr.com/photos/107975999@N08/10847564815/
Jesel Sportsman Shaft Mount Rocker Arms for Dart Pro 1 Heads, 1.5 ratio, great condition, comes with rockers, stands, shims, all bolts and hardware, brand new this spring, 20 runs on them. $1100 new, asking $700
http://www.flickr.com/photos/107975999@N08/10716765463/
http://www.flickr.com/photos/107975999@N08/10716771683/
2004 Pontiac GTO M12/T56 6 Speed Transmission, 67k Miles on just the Transmission. ONLY 1,000 Miles on; Monster Stage 3 Clutch (good to 700rwhp), Billet Flywheel, Throw Out Bearing/Slave Cylinder, Tick Adjustable Master Cylinder, Tick Speed Bleeder. Pedal, Reservoir, Short Throw Shifter Included. $2850obo
Also have a GForce 1320 Aluminum 3.5" 1 Piece Drive shaft, With Adapter Plate, and all hardware for sale for a 04-06 GTO. $400obo
* Will Package Deal Whole Transmission Set up and Driveshaft for $3000obo
http://www.flickr.com/photos/107975999@N08/10716682913/
Callies Compstar 3.875 Stroke Crank, 350 Mains, 2.100 Journals, Forged 4340, $804 New from Summit Racing, Crank has 25 Runs, looks like new, great shape, ready to go, asking $600obo
http://www.flickr.com/photos/107975999@N08/10716566045/
http://www.flickr.com/photos/107975999@N08/10716662366/
http://www.flickr.com/photos/107975999@N08/10716574555/
http://www.flickr.com/photos/107975999@N08/10716579325/
Pro Systems 1050 Alcohol Dominator, Cost over 1300 to Build, Has the Big Jets (200/210/220). Carb was only run for about 10 Runs, I have the complete Build Sheet, Very Nice Carb, no Problems at all, Comes with fuel line and pressure guage, Asking 850obo
http://www.flickr.com/photos/107975999@N08/10716556496/
http://www.flickr.com/photos/107975999@N08/10716759243/
Pro Comp Electric Water Pump for a SBC, Works Great, Nothing Wrong With It. Maybe 25 Miles on it Total. Was on a Drag Truck. Going to an LSx Set up. No Need for it, Need it gone. Asking $80obo
http://www.flickr.com/photos/107975999@N08/10716612264/
http://www.flickr.com/photos/107975999@N08/10716819433/
Icon Performance Forged Pistons for a 421. Part # IC965-030, 4.155 Bore, 1.5/1.5/3.0mm Rings, 14.1 Compression with 64cc Heads, Pistons are like new, Rings in great shape, 20 Runs down the race track, new they are $800 Asking $450 obo
http://www.flickr.com/photos/107975999@N08/10716617716/
http://www.flickr.com/photos/107975999@N08/10716529005/
Callies Compstar 6.0 Forged Rods SBC, Rods in Great shape, Part #A6000DS2A2AH. Maybe 20 Runs on them total, ". Asking $425obo
http://www.flickr.com/photos/107975999@N08/10716529005/
Hedman Husler Fenderwell Headers for a V-8 S-10. Part #65857. $660 Brand New from Summit Racing. Cermashine Lifetime Warranty Coating Cost me $225. Headers are like new and in great shape. Comes with Stahl Pattern Plates, and all the hardware, Asking $600obo
http://www.flickr.com/photos/107975999@N08/10716677206/
http://www.flickr.com/photos/107975999@N08/10716664234/
http://www.flickr.com/photos/107975999@N08/10716667244/
Dart SHP Block, Bored .030 over @ 4.155. 350 Mains, New they are 1600, Then about 500 worth of machine work,has 20 runs down the dragstripe on it. Has studded 4 bolt splayed caps. Cylinders look great, Cam bearings look new. Block was brand new in April 2013 asking $1300obo
http://www.flickr.com/photos/107975999@N08/10847715854/
http://www.flickr.com/photos/107975999@N08/10847640436/
Holley 650cfm Double Pumper Carb, doesnt have Choke Tower, Currently powering a Carb'd LS1, older carb, but works great, asking $200obo
http://www.flickr.com/photos/107975999@N08/10716704063/
- Comp Cam Custom Ground Roller Cam & PBM Roller Lifters, good shape, have about 20 runs on it. - $350
http://www.flickr.com/photos/107975999@N08/10716532956/
http://www.flickr.com/photos/107975999@N08/10716536616/
- Comp Hi Tech Push Rods PN# 7974 Chromoly Pushrods have about 20 runs on them- $75
http://www.flickr.com/photos/107975999@N08/10716554895/
http://www.flickr.com/photos/107975999@N08/10716636974/
- Canton S-10 Swap Oil Pan w/windage Tray great condition. only on my motor for 6 months, comes with flexible braided dipstick, Melling HV-55 Oil pump, and pickup- $175
http://www.flickr.com/photos/107975999@N08/10847707576/
http://www.flickr.com/photos/107975999@N08/10847713176/
- Pro Comp Shootout High Rise Intake, port matched to a 1206, runners lined up better than my high dollar dart intake. Comes with 12pt bolts $100
http://www.flickr.com/photos/107975999@N08/10716533324/
- Stock Chrome Oil Pan 5qts, Great shape, Brand New, Never been Used, $40
http://www.flickr.com/photos/107975999@N08/10847680026/
http://www.flickr.com/photos/107975999@N08/10847686056/
- GM 10 Bolt 8.5 Ring Gear, 3.42 Gear, out of a 01 GMC Sierra, Great Shape $75obo
http://www.flickr.com/photos/107975999@N08/10847923423/
http://www.flickr.com/photos/107975999@N08/10847928963/
- True Dual Roller Billet Timing Chain with locks & bolts, Looks Brand new, asking $75
http://www.flickr.com/photos/107975999@N08/10847581195/
http://www.flickr.com/photos/107975999@N08/10847731704/
- Chrome Timing Cover, Brand New, Never Installed, $10
http://www.flickr.com/photos/107975999@N08/10847680026/
http://www.flickr.com/photos/107975999@N08/10847686056/
- Stock Timing Cover, Fabbed For Roller Cam Button, $10
http://www.flickr.com/photos/107975999@N08/10847680026/
http://www.flickr.com/photos/107975999@N08/10847686056/
- Aluminum Tall Valve Covers, comes with studs, and breathers, baffled, shine up really nice $40
http://www.flickr.com/photos/107975999@N08/10847773204/
http://www.flickr.com/photos/107975999@N08/10847779604/
- QA1 pn# BAR350K, T-Bar Mounts for shocks, I have the pair, still in package, never used. $20
http://www.flickr.com/photos/107975999@N08/10847679144/
- 14x5 One Piece Dry Air Filter, Like new condition, $50
http://www.flickr.com/photos/107975999@N08/10847668116/
http://www.flickr.com/photos/107975999@N08/10847755884/
- ARP Head Studs for SBC, Only Torqued once, Studs, 6pt Nuts, Washers, Like New, $100 (Pictured in top photo)
- MSD Complete Ignition. Pro Billet Distributor, 6AL Box, Blaster 2 Coil and bracket, MSD 8.5mm Wires all work great! 20 runs down the track is all!- $400 (Pictured in top photo)
- RCI 15 Gallon Fuel Cell, No sending unit, nice cell, doesn’t leak, $75
-- TCI Heavy Duty SFI 29.1 Flexplate SBC 163 Tooth, Great Shape, comes with ARP Bolts, asking $40 (Pictured in top photo)
- Mr Gasket 2” Aluminum Carb Spacers, for 4150 flange, one is ported, one is stock, asking $15ea (Pictured in top photo)
- Moroso Aluminum 4150 to 4500 Carb Adaptor Plate, 2” tall, 4150 Intake side, 4500 Dominator carb side, like brand new asking $40 (Pictured in top photo)
- Billet Swivel Water Neck, Nice, with allen bolts, O’ring in good shape $10 (Pictured in top photo)
- Dominator Air Cleaner Base, Brand New, $15 (Pictured in top photo)
- Jegs Low Mount Alternator Bracket, Drivers Side, Chrome, Like New, $10 (Pictured in top photo)
- Billet HEI Distributor, Not sure on brand, Delco Cap, worked great when pulled, $25 (Pictured in top photo)
- Howe Aluminum Radiator 16 x 27.5- $100