A Bunch of Sh*t for sale! Dart Block, Jesel, Callies, 421ci, SELLING ALL MY SBC STUFF

[83s10v8]

https://post.craigslist.org/manage/4169375908 -- Callies Compstar Forged Rods

https://post.craigslist.org/manage/4169673564 -- Hedman Husler S-10 Fenderwell Headers

https://post.craigslist.org/manage/4169728178 -- Fresh Dart SHP Block

https://post.craigslist.org/manage/4169369301 -- ICON Forged 14.1 Pistons

https://post.craigslist.org/manage/4169357369 -- Electric SBC Waterpump

https://post.craigslist.org/manage/4169349719 -- Pro Systems Alcohol Dominator Carb

https://post.craigslist.org/manage/4169306780 -- Callies Compstar Forged 3.875 421 Crank

https://post.craigslist.org/manage/4169294490 -- Holley 650 Double Pumper

https://post.craigslist.org/manage/4169322649 -- 04-06 Gforce Aluminum 1pc Driveshaft

https://post.craigslist.org/manage/4169281533 -- 04-06 M12/T56 6spd Trans/Monster Stage 3 Clutch

https://post.craigslist.org/manage/4151950917 -- Jesel Sportsman 1.5 Shaft Mount Rockers



***ALSO HAVE (but havent listed it yet)


- Comp Cam Custom Ground Roller Cam (i can get you specs if interested .642lift) & Roller Lifters- $350

- Comp Hi Tech Push Rods PN# 7974 Chromoly Pushrods- $75

- Fluidamper 6" Damper For SBC- $150

- Canton S-10 Swap Oil Pan w/windage Tray- $175

- MSD Complete Ignition. Pro Billet Distributor, 6AL Box, Blaster 2 Coil, MSD 8.5mm Wires- $400

- Pro Comp Shootout High Rise Intake $125

- Stock Chrome Oil Pan & Timing Cover $25

- Howe Aluminum Radiator 16 x 27.5- $125



ALL THESE PARTS WHERE BOUGHT BRAND NEW THIS SPRING. NOTHING IS WRONG WITH ANY OF IT, IT ALL WORKED FINE WHEN TAKEN APART.

[83s10v8]

UPDATED FOR SALE SHEET..... THESE LINKS WORK

http://waterloo.craigslist.org/pts/4169375908.html -- Callies Compstar Forged Rods
http://waterloo.craigslist.org/pts/4169673564.html-- Hedman Husler S-10 Fenderwell Headers

http://waterloo.craigslist.org/pts/4169728178.html-- Fresh Dart SHP Block

http://waterloo.craigslist.org/pts/4169369301.html-- ICON Forged 14.1 Pistons

http://waterloo.craigslist.org/pts/4169357369.html-- Electric SBC Waterpump

http://waterloo.craigslist.org/pts/4169349719.html-- Pro Systems Alcohol Dominator Carb

http://waterloo.craigslist.org/pts/4169306780.html-- Callies Compstar Forged 3.875 421 Crank

http://waterloo.craigslist.org/pts/4169294490.html-- Holley 650 Double Pumper

http://waterloo.craigslist.org/pts/4169322649.html -- 04-06 Gforce Aluminum 1pc Driveshaft

http://waterloo.craigslist.org/pts/4169281533.html -- 04-06 M12/T56 6spd Trans/Monster Stage 3 Clutch

http://waterloo.craigslist.org/pts/4151950917.html-- Jesel Sportsman 1.5 Shaft Mount Rockers



***ALSO HAVE (but havent listed it yet)


- Comp Cam Custom Ground Roller Cam (i can get you specs if interested .642lift) & Roller Lifters- $350

- Comp Hi Tech Push Rods PN# 7974 Chromoly Pushrods- $75

- Fluidamper 6" Damper For SBC- $150

- Canton S-10 Swap Oil Pan w/windage Tray- $175

- MSD Complete Ignition. Pro Billet Distributor, 6AL Box, Blaster 2 Coil, MSD 8.5mm Wires- $400

- Pro Comp Shootout High Rise Intake $125

- Stock Chrome Oil Pan & Timing Cover $25

- Howe Aluminum Radiator 16 x 27.5- $125



ALL THESE PARTS WHERE BOUGHT BRAND NEW THIS SPRING. NOTHING IS WRONG WITH ANY OF IT, IT ALL WORKED FINE WHEN TAKEN APART.

[83s10v8]

Jesel Sportsman Shaft Mount Rocker Arms for Dart Pro 1 Heads, 1.5 ratio, great condition, comes with rockers, stands, shims, all bolts and hardware, brand new this spring, 20 runs on them. $1100 new, asking $750
http://www.flickr.com/photos/107975999@N08/10716765463/
http://www.flickr.com/photos/107975999@N08/10716771683/

2004 Pontiac GTO M12/T56 6 Speed Transmission, 67k Miles on just the Transmission. ONLY 1,000 Miles on; Monster Stage 3 Clutch (good to 700rwhp), Billet Flywheel, Throw Out Bearing/Slave Cylinder, Tick Adjustable Master Cylinder, Tick Speed Bleeder. Pedal, Reservoir, Short Throw Shifter Included. $3000obo
Also have a GForce 1320 Aluminum 3.5" 1 Piece Drive shaft, With Adapter Plate, and all hardware for sale for a 04-06 GTO. $500obo
* Will Package Deal Whole Transmission Set up and Driveshaft for $3250obo
http://www.flickr.com/photos/107975999@N08/10716682913/


Callies Compstar 3.875 Stroke, 350 Mains, 2.100 Journals, Forged 4340, $804 New from Summit Racing, Crank has 25 Runs, looks like new, great shape, ready to go, asking $625obo
http://www.flickr.com/photos/107975999@N08/10716566045/
http://www.flickr.com/photos/107975999@N08/10716662366/
http://www.flickr.com/photos/107975999@N08/10716574555/
http://www.flickr.com/photos/107975999@N08/10716579325/


Pro Systems 1050 Alcohol Dominator, Cost over 1300 to Build, Has the Big Jets (200/210/220). Carb was only run for about 10 Runs, I have the complete Build Sheet, Very Nice Carb, no Problems at all, Asking 850obo
http://www.flickr.com/photos/107975999@N08/10716556496/
http://www.flickr.com/photos/107975999@N08/10716759243/

Pro Comp Electric Water Pump for a SBC, Works Great, Nothing Wrong With It. Maybe 25 Miles on it Total. Was on a Drag Truck. Going to an LSx Set up. No Need for it, Need it gone. Asking $100obo
http://www.flickr.com/photos/107975999@N08/10716612264/
http://www.flickr.com/photos/107975999@N08/10716819433/

Icon Performance Forged Pistons for a 421. Part # IC965-030, 4.155 Bore, 1.5/1.5/3.0mm Rings, 14.1 Compression with 64cc Heads, Pistons are like new, Rings in great shape, 20 Runs down the race track, Asking $500 obo
http://www.flickr.com/photos/107975999@N08/10716617716/
http://www.flickr.com/photos/107975999@N08/10716529005/


Callies Compstar 6.0 Forged Rods SBC, Rods in Great shape, Part #A6000DS2A2AH. Maybe 20 Runs on them total, ". Asking $450obo
http://www.flickr.com/photos/107975999@N08/10716529005/

Hedman Husler Fenderwell Headers for a V-8 S-10. Part #65857. $660 Brand New from Summit Racing. Cermashine Lifetime Warranty Coating Cost me $225. Headers are like new and in great shape. Comes with Stahl Pattern Plates, and all the hardware, Asking $600obo
http://www.flickr.com/photos/107975999@N08/10716677206/
http://www.flickr.com/photos/107975999@N08/10716664234/
http://www.flickr.com/photos/107975999@N08/10716667244/

Dart SHP Block, Fresh Hone & Cam Bearings, Bored .030 over @ 4.155. 350 Mains, New they are 1600, Then about 500 worth of machine work, Has studded 4 bolt splayed caps. Comes with ARP Head Studs. asking $1350obo
http://www.flickr.com/photos/107975999@N08/10716592795/
http://www.flickr.com/photos/107975999@N08/10716875313/
http://www.flickr.com/photos/107975999@N08/10716672134/


Holley 650cfm Double Pumper Carb, doesnt have Choke Tower, Currently powering a Carb'd LS1, older carb, but works great, asking $225obo
http://www.flickr.com/photos/107975999@N08/10716704063/



- Comp Cam Custom Ground Roller Cam (i can get you specs if interested .642lift) & Roller Lifters, good shape, have about 20 runs on it. - $350
http://www.flickr.com/photos/107975999@N08/10716532956/
http://www.flickr.com/photos/107975999@N08/10716536616/

- Comp Hi Tech Push Rods PN# 7974 Chromoly Pushrods have about 20 runs on them- $75
http://www.flickr.com/photos/107975999@N08/10716554895/
http://www.flickr.com/photos/107975999@N08/10716636974/

- Fluidamper 6" Damper For SBC paints chipping. but the balancer was new in spring. great condition- $150
http://www.flickr.com/photos/107975999@N08/10716825813/
http://www.flickr.com/photos/107975999@N08/10716549465/

- Canton S-10 Swap Oil Pan w/windage Tray great condition. only on my motor for 6 months- $175

- MSD Complete Ignition. Pro Billet Distributor, 6AL Box, Blaster 2 Coil, MSD 8.5mm Wires all work great!- $400

- Pro Comp Shootout High Rise Intake, port matched to a 1206, runners lined up better than my high dollar dart intake. $125
http://www.flickr.com/photos/107975999@N08/10716533324/

- Stock Chrome Oil Pan & Timing Cover for sbc $25

- Howe Aluminum Radiator 16 x 27.5- $125