PDA

View Full Version : Recent Photos of my Bucket



MoncefA33
09-03-2013, 10:25 AM
So earlier this year Josh Silver had finished assembling and swapping my new motor in the car. Runs good, although I'm running out of injector (90%+ IDC) even with the Walbro pump. So I will be getting a 4" MAF/intake and bigger injectors in the near future. 6MT swap is in the plans as well.

Car made 259whp/257wtq on a Dyno Dynamics machine before a strap broke. AFR was still on the lean side (VQs prefer 12.50-12.80 AFR and right now I am hitting 13.3's on the top end) and the timing had not been fully dialed in yet. The e-Manage is causing problems with overriding the factory rev limit so I am looking at other tuning options.


https://lh3.googleusercontent.com/-Nu3xH0n4_0w/UhItjemfDsI/AAAAAAAACfU/21IGdXF5f_o/s800/%255BUNSET%255D.jpg
https://lh3.googleusercontent.com/-DN6PSwB0suY/UhOlMdxmXxI/AAAAAAAACgw/vCWkK8gSzNI/s800/IMG_20130814_191115_035.jpg
https://lh6.googleusercontent.com/-pTl8H36rdu4/UhJ6zuStlBI/AAAAAAAACf8/a0RyOaKtLoo/s800/IMG_20130817_200225_742.jpg
https://lh4.googleusercontent.com/-omiipT_Bz7U/UhuiPamHcuI/AAAAAAAAChE/eJ5zQyd_W9Q/s800/%255BUNSET%255D.jpg

AutoMods
09-03-2013, 10:36 AM
bustin dyno straps. nice looks very clean. are you coming manual shootout?

MoncefA33
09-03-2013, 11:26 AM
bustin dyno straps. nice looks very clean. are you coming manual shootout?

The car is too low for that particular dyno. The accessory belt was rubbing on the straps the entire time. I won't be racing at the manual shootout, I haven't budgeted for slicks yet. lol

watman02
09-03-2013, 08:38 PM
who needs slick ill be running street tires!

AutoMods
09-03-2013, 10:53 PM
no need for slicks, just run what ya brung.... for fun

MoncefA33
09-04-2013, 07:33 AM
who needs slick ill be running street tires!

Your car is driving the correct wheels haha.


no need for slicks, just run what ya brung.... for fun

:drive:spinspinspin:drive:spinspinspin:drive:spins pinspin

Sleepy
09-04-2013, 08:57 AM
Fwd is a bit of a challange to get traction. Being as low as you are cannot help axles either.

MoncefA33
09-04-2013, 09:11 AM
Fwd is a bit of a challange to get traction. Being as low as you are cannot help axles either.

yea, they click allll the time.

Sleepy
09-04-2013, 10:15 AM
Any traction is going to make those clicks go snap.
How well do maxima's keep their axles together? Is it pretty common to break them or are they pretty strong?

MoncefA33
09-04-2013, 11:29 AM
Any traction is going to make those clicks go snap.
How well do maxima's keep their axles together? Is it pretty common to break them or are they pretty strong?

From what I've seen of max-effort drag racing setups (big clutch, slicks, traction bars) they hold power OK. There are cars (not mine) that have been 110+ or 120+ in the 1/4 mile with stock axles.

At my height they are weakened substantially due to the way they're angled.

Sleepy
09-04-2013, 01:59 PM
I have noticed, if the car is set up well enough stock axles on most cars will hold up well. Fwd that is.

You have a unique car for sure.

MoncefA33
09-04-2013, 02:46 PM
I have noticed, if the car is set up well enough stock axles on most cars will hold up well. Fwd that is.

You have a unique car for sure.

Thanks dude.

Quick sound clip:

http://www.youtube.com/watch?v=YAN-8XyrHkQ

Batwood
09-06-2013, 10:17 AM
Thanks dude.

Quick sound clip:

http://www.youtube.com/watch?v=YAN-8XyrHkQ

You told me it spun till 80. ;)

MoncefA33
09-06-2013, 02:29 PM
You told me it spun till 80. ;)

On teh track yes. Street its ok. lol

Domestic Disturbance
09-12-2013, 11:31 PM
you have adjustable suspension. Raise that thing for a day and bring it out to the track. That is... unless you're scared

MoncefA33
09-13-2013, 07:11 AM
you have adjustable suspension. Raise that thing for a day and bring it out to the track. That is... unless you're scared

I sold it. :o