PDA

View Full Version : 4g63 Mustang Partout


skipdownstairs
04-26-2013, 03:21 PM
Here is a list of the stuff from the 4g63 mustang build basically the thing needs a set of pistons since a pin got loose on one of them at the race last season I'll make a great deal to sell it all together or will part it out let me know if your interested or have questions 50 cents to the dollar or better from new price
Need this stuff gone
2 sets 1G engine blocks 100.00 each
2 sets arp main studs 125.00 each
1 set arp head studs 125.00
crower rods 679.00
2 cranks 50.00 ea
ported 1G head stainless valves crower spring ti retainers
punishment racing stainless header 800.00 new
jm fab intake race version 510.00 new
throttle body off naturally aspirated 1G
inter-cooler piping various pieces
gt35r ball bearing turbo .63 or .82 housing your choice 1100.00 new
waste gate 38mm tial 260.00 new
850 cc fic injectors 274 new
bov tial 50 mm 240.00 new
ecm tuning v3 speed density 545.00 new
all sensors for v3 170.00 with 4 bar map
wiring harness for 2g dsm
efi aromotive regulator 260.00 new
engine adapter plate for chevy 350 or 400 trans 375.00 new
flywheel adapter and flywheel bolts included
starter for conversion setup 125.00 new
ptc 8” converter 725.00 new
czarcasm
05-19-2013, 12:59 PM
Pmed!!!
ashanson
05-21-2013, 02:27 AM
Willing to sell the entire car with the motor? The parts prices don't seem 1/2 off, or are the prices listed what you paid? In any case, have the main or head studs been torqued ever?
85XR7Project
05-22-2013, 07:50 AM
I believe he is putting a I6T in it now so I would bet this is just parts.
derek072887
05-22-2013, 08:09 AM
Actually it has an LS style V8 in it, with an F1X
skipdownstairs
05-22-2013, 08:26 AM
The prices that I listed are what I paid for them so 1/2 off those prices.

Heads and mains have been torqued but NEVER over torqued.
AutoMods
05-22-2013, 09:34 AM
If your doing half price, i will take these..

jm fab intake race version 510.00 new
gt35r ball bearing turbo .63 or .82 housing your choice 1100.00 new
waste gate 38mm tial 260.00 new
850 cc fic injectors 274 new
bov tial 50 mm 240.00 new
ecm tuning v3 speed density 545.00 new
skipdownstairs
05-22-2013, 10:47 AM
If your doing half price, i will take these..

jm fab intake race version 510.00 new
gt35r ball bearing turbo .63 or .82 housing your choice 1100.00 new
waste gate 38mm tial 260.00 new
850 cc fic injectors 274 new
bov tial 50 mm 240.00 new
ecm tuning v3 speed density 545.00 new


Ha! for you its double the price + interest
alotaboost
05-22-2013, 06:05 PM
Do you still have the motor mounts?
skipdownstairs
05-23-2013, 08:19 AM
The engine mounts utilized the front engine mount on the 4g engine which you can see in my build pictures and the rear mount is a mid plate yes I have tham all comes with adapter for gm trans
skipdownstairs
05-24-2013, 09:05 AM
All items are sold listed below:

jm fab intake race version 510.00 new
throttle body off naturally aspirated 1G
gt35r ball bearing turbo .63 or .82 housing your choice 1100.00 new
waste gate 38mm tial 260.00 new
850 cc fic injectors 274 new
bov tial 50 mm 240.00 new
ecm tuning v3 speed density 545.00 new
all sensors for v3 170.00 with 4 bar map
wiring harness for 2g dsm
efi aromotive regulator 260.00 new
engine adapter plate for chevy 350 or 400 trans 375.00 new
flywheel adapter and flywheel bolts included
starter for conversion setup 125.00 new