Domestic Disturbance
02-12-2013, 11:53 PM
I have an entire t56 6 speed swap for a fox body. The only things I know of that its missing is a clutch, pressure plate, longer speedo cable, trans mount bushing, and reverse lockout solenoid pigtail. Any questions or offers let me know.
The kit includes -
03/04 t56
pro 5.0 shifter
03/04 knob
kenne brown crossmember relocation brackets
stock crossmember with good bushings
adjustable clutch cable (I think its b&m, not sure, billet, pretty)
clutch quadrant
aluminum flywheel freshly resurfaced. Little surface rust starting on it from sitting out but will wipe right off. I think its centerforce, not sure. SFI approved
dynotech aluminum driveshaft
I think thats everything.
$1600
Black/black Leather and suede Cobra seats I got from bonesaw on here. Spent 2 hours conditioning them. Passengers side is absutely flawless. Drivers side has minimal wear at best.
There's one 1/2 inch tear on the back of one of them, and the seat release on the back of the drivers seat is missing the plastic piece. Comes with everything to mount in car. Just front seats.
$800
Flaming river solid steering shaft for power steering. $125
HPM Rear Upper control arms Dual adjustable. Sandblasted and painted Hammertone black. Paint ran some, can re blast. $125
HPM Lower Control arms and rear sway bar. Would like to keep these together. Red Powdercoat $200
89 5.0 engine. 60k. Torn down to shortblock. Block has been cleaned, deburred, and wire brushed. Piston tops cleaned. Would recommend rebearing/ring the engine while torn down. Comes with e7t3 heads, factory intake manifold, rockers, fuel rails, injectors, everything off the long block. $300 obo
Granatelli 90mm maf tuned for 24lbs injectors. Never been used. Has silicon couplers. $100
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/470631_1980580152356_1809137703_o.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/456887_2039247178995_571809559_o.jpg
The kit includes -
03/04 t56
pro 5.0 shifter
03/04 knob
kenne brown crossmember relocation brackets
stock crossmember with good bushings
adjustable clutch cable (I think its b&m, not sure, billet, pretty)
clutch quadrant
aluminum flywheel freshly resurfaced. Little surface rust starting on it from sitting out but will wipe right off. I think its centerforce, not sure. SFI approved
dynotech aluminum driveshaft
I think thats everything.
$1600
Black/black Leather and suede Cobra seats I got from bonesaw on here. Spent 2 hours conditioning them. Passengers side is absutely flawless. Drivers side has minimal wear at best.
There's one 1/2 inch tear on the back of one of them, and the seat release on the back of the drivers seat is missing the plastic piece. Comes with everything to mount in car. Just front seats.
$800
Flaming river solid steering shaft for power steering. $125
HPM Rear Upper control arms Dual adjustable. Sandblasted and painted Hammertone black. Paint ran some, can re blast. $125
HPM Lower Control arms and rear sway bar. Would like to keep these together. Red Powdercoat $200
89 5.0 engine. 60k. Torn down to shortblock. Block has been cleaned, deburred, and wire brushed. Piston tops cleaned. Would recommend rebearing/ring the engine while torn down. Comes with e7t3 heads, factory intake manifold, rockers, fuel rails, injectors, everything off the long block. $300 obo
Granatelli 90mm maf tuned for 24lbs injectors. Never been used. Has silicon couplers. $100
https://sphotos-a.xx.fbcdn.net/hphotos-prn1/470631_1980580152356_1809137703_o.jpg
https://sphotos-b.xx.fbcdn.net/hphotos-ash4/456887_2039247178995_571809559_o.jpg