Got a good deal on a motor, so I upgraded!

[Jappbox]

Well 48 Days and 80 Hours Labor I got it done. It was not easy, very tough and annoying to wrench on both the car and the CPE side mount turbo system. (no book or manuals) but Im a do it yourself guy and took on the challenge. Fixed allot of little issues and things that would have been issues down the road. Now my but diff and TR6060 are backed by a Fully built motor. And I still have the Stock long block chilling in the corner. Goal after clutch break in is 1000whp on pure 93 no meth or additives, then C16 later down the road. After start up, it had zero leaks and was ready for a good cleaning, Enjoy the pics.

How it started shipped from Canada ehh?
http://i114.photobucket.com/albums/n269/JappBox/037.jpg
Changing stuff over the the new long block
http://i114.photobucket.com/albums/n269/JappBox/049.jpg
Grinding on the block for the drivers turbos (I hated doing this)
http://i114.photobucket.com/albums/n269/JappBox/051.jpg

goodies
http://i114.photobucket.com/albums/n269/JappBox/056.jpg

Thanks to comp for the rebuild/upgrade went with Billet 71mm and my same 1.32 hot side housings. Biggest turbos you can fit with the E-Cover
http://i114.photobucket.com/albums/n269/JappBox/058.jpg

New TI wrap on the Manifolds, this stuff is awesome looking
http://i114.photobucket.com/albums/n269/JappBox/060.jpg

Tight Fit
http://i114.photobucket.com/albums/n269/JappBox/062.jpg

Some gold to try and keep the heat down by the turbos and exhaust
http://i114.photobucket.com/albums/n269/JappBox/065.jpg

Spec Twin SD88ST Feels like the spec 3+ and seems to have the same disk but with 2!
http://i114.photobucket.com/albums/n269/JappBox/071.jpg

Ready to drop in
http://i114.photobucket.com/albums/n269/JappBox/072.jpg

About ready, Valve covers on with my custom Dual vent system, -10 and -8 lines on both valve covers.
http://i114.photobucket.com/albums/n269/JappBox/IMG_0127.jpg

While It was down I had Tyler Chekal paint my Side panels, much better and clean.
http://i114.photobucket.com/albums/n269/JappBox/IMG_0135.jpg

All done and cleaned up.
http://i114.photobucket.com/albums/n269/JappBox/IMG_0137.jpg
http://i114.photobucket.com/albums/n269/JappBox/IMG_0136.jpg

[slow ride]

Pretty sweet man. Whats the engine have for guts?

[Jappbox]

ported heads, Larger Iconal Valves, Arrow Racing Shaft Rockers, Dual Springs, Cromoly push rods, UGR Turbo cam, APR studs, Billet Main caps, Carrillo Rods with 7/16 bolts, Ross Pistons with every upgrade option. 9:4:1 Compression

[slow ride]

Well played

[Jappbox]

You asked, I delivered :biggrin:

[86svo9L]

Amazing.

[85XR7Project]

So freakin badass. ive been wanting to see more of this car for a while.

[AutoMods]

nice, lots of productive work in a short amount of time. always takes longer than you think it would.

[Xboosted23X]

Not bad for a two power adder car. lets get those break in miles going.

[AutoMods]

Not bad for a two power adder car. lets get those break in miles going.

plus he needs 10 cylinders, just call it a triple power adder car

[stangvortech]

plus he needs 10 cylinders, just call it a triple power adder car

hahaha


Looking good!!!!

[FiFdYnUtZ]

Looks great Jesse!

[c_mart_28]

Looks killer man.

At some point I'd love to get a ride in that thing!

[Larsons Fox]

ported heads, Larger Iconal Valves, Arrow Racing Shaft Rockers, Dual Springs, Cromoly push rods, UGR Turbo cam, APR studs, Billet Main caps, Carrillo Rods with 7/16 bolts, Ross Pistons with every upgrade option. 9:4:1 Compression

Wow that thing is going to be insane. Great work Jesse, you got that done quick!

[Domestic Disturbance]

just fucking badass!

[Batwood]

Very nice!
Too bad the weather got shitty Saturday. Was looking forward to seeing it out.

[Scott]

How in the world do you fit a air cleaner on that driver side turbo?

[Ricky]

I remembered I still have your GoPro. I will try and run that back to you this week.

[Jappbox]

How in the world do you fit a air cleaner on that driver side turbo?

I can get a pipe on there its about a 70 Degree bend, I did have a Filter before but I think they are very restricive because they are only 3"x5" I cant fit anything bigger. So this Time around I just did what the Previous owner did and that was Screen them. I however re-did them with some nice aluminum screen thats got couplers over them to prevent sucking them in. Its not the idea thing but I dont drive it very far or on dirty areas. And if the old owner's hack job worked mine will.

[AutoMods]

big filters flow well because they have a lot of surface area. screens don't have much surface area, somehow if you made a 3x5 cone screen filter that would be ideal or would allow you to run a finer mesh and still flow well

[Scott]

Theres a few places around here with flow benchs that would be able to test your designs.. could weld together a stainless cage and tack weld some screen on it

[Drifte]

Sweet, no more choking out the bike gang as we try to keep up!

K&N tested a cone filter to chicken wire. because of surface area the filter flowed better. I dont think its going to make a lot of difference on a turbo though.

[BGjohnson]

It makes a HUGE difference on a turbo car. There are calculators online to see how big each filter needs to be, his would be pretty large for that much power.

Anyways, man that looks great! I hope you keep having fun with the car, it would be nice to see it in person.

[Jappbox]

I did alot of searching to try and find something better then my little k&N filters I ran last year. This is what I decided with. UNI foam filters, the open Cell foam will alow the best air flow and keep all dirt out, plus its open all the way around unlike my other filters that dont breath on the end. now if I can only get them to fit. Size is 3"x6"

http://www.amazon.com/Uni-Filter-UP6300-Universal-Urethane/dp/B00310YUYI

[AutoMods]

I did alot of searching to try and find something better then my little k&N filters I ran last year. This is what I decided with. UNI foam filters, the open Cell foam will alow the best air flow and keep all dirt out, plus its open all the way around unlike my other filters that dont breath on the end. now if I can only get them to fit. Size is 3"x6"

http://www.amazon.com/Uni-Filter-UP6300-Universal-Urethane/dp/B00310YUYI

dirt bike style. might want to make sure it comes with an inner cage to prevent collapse. I tried running a 4" silicone 90 degree open to the air last year in preparation for the track, I thought it wouldn't collapse because no filter and no restriction, but it did collapse. car fell on its face pretty bad when that happened.

[Jappbox]

It has a cage inside it, like the perrin foam ones. I just hope the foam stays together and does not come apart in chunks and gets sucked in. I think they will be ok for a year or so then will need replaced for that reason.

[TbTalon94]

Why not just add an extension onto the inlet to a place you can run a large filter.

[TbTalon94]

What's the matter, Jenn tell you that you can't talk to me on the forums either?

[Jappbox]

There is no room to run to another spot. The piping that came with the car I would have to run it though th wishbone suspension with no brackets of any kind and would have to cut up some stuff up front to make it work.

As regards to the not talking to you. I never said that. The whole reason behind it before was not your fault it was the drama infested life your now wife drug mine into. She wanted out without more drama. Its not that big of a deal. Your the one making it awkward I even tryed bringing you buisness like old times, But your still upset. Time moves on man.

[Jappbox]

Next time give a guy at least 24 hours to respond before cracking rude comments. I do sleep and i go to bed early I'm getting old.

[StreetSweeper]

There is no room to run to another spot. The piping that came with the car I would have to run it though th wishbone suspension with no brackets of any kind and would have to cut up some stuff up front to make it work.

As regards to the not talking to you. I never said that. The whole reason behind it before was not your fault it was the drama infested life your now wife drug mine into. She wanted out without more drama. Its not that big of a deal. Your the one making it awkward I even tryed bringing you buisness like old times, But your still upset. Time moves on man.

http://www.youtube.com/watch?v=eMoMBFhMdDw