PDA

View Full Version : picked up another rx7


AutoMods
08-02-2012, 04:14 PM
the detail is great. has a rotary under the hood. rear speakers and rear bins are accurate. i need to buy an fbody and swap the model ls1 into this

803
85XR7Project
08-02-2012, 04:44 PM
the detail is great. has a rotary under the hood. rear speakers and rear bins are accurate. i need to buy an fbody and swap the model ls1 into this

803

Lol. Nice. Initial D
AutoMods
08-02-2012, 05:06 PM
http://www.youtube.com/watch?v=wOfz-KSl8_k
http://www.youtube.com/watch?v=wOfz-KSl8_k
c_mart_28
08-02-2012, 08:45 PM
Ha! I have a couple of those :)
Drifte
08-03-2012, 07:53 AM
wheres the full size rx-7 updates?
AutoMods
08-03-2012, 10:54 AM
wheres the full size rx-7 updates?

still have a lot to do. I worked out a turbo trade to andy fangman / Ace Body Shop for some paint work on my fenders, so they look great installed now. installed some FIC 1100 ev14's and new fuel rails and fuelab regulator and dual feed lines into the engine bay. had to put a replacement aem wideband sensor in. finished welding the swap brackets on my ford rear axle.

stock rear is coming out any day now and have to install all the grannys rear end conversion parts. Have to assemble my ported truck heads and install them with all the accessories on the forged motor and install it. build a new exhaust. lots of work to do.
Drifte
08-03-2012, 11:03 AM
Got any picture updates?
AutoMods
08-03-2012, 11:26 AM
Don't worry, the yellow line is only temporary

http://importevolution.com/temp/rx7/fuel_rails.jpg



I basically copied this setup I saw online
http://forum.lsxtv.com/photos/data/504/2bdvv5.jpg



here is an injector feed hole on the stock rail, its the bung that the top of one injector would slide/mount into. quite restrictive . the new rail hole is just as wide as the entire opening
http://importevolution.com/temp/rx7/stock_fuel_rail.jpg
Drifte
08-03-2012, 12:34 PM
Nice, maybe that will help up top afr issues seen last year? Also, FPR adjustments through the hood scoop is awesome!

Is that the 4" DP or the same one as before but wrapped?
AutoMods
08-03-2012, 02:43 PM
its still a 3" downpipe, i'm going to upgrade it to 3.5"

here is my fuel pressure moving around, green line, moves about 5psi up and down. that is with the regulator before the rails and now the fpr is after the rails and each rail has its own supply line. the log after the upgrades it is rock solid . car is off in this graph, with the pump toggled on.

http://www.importevolution.com/temp/rx7/fuel_pressure.png
slow ride
08-06-2012, 11:16 AM
Hummm, I must have been on to something ;)