Phish
07-19-2012, 06:21 AM
I have a ton of 4.6l parts that i am looking to sell. Here it goes:
Blocks:
Aluminum Teskid block out of a 98 Cobra. - No main caps or main bolts
Aluminum Teskid block bored .30 over. - currently at the machine shop
getting decked so its not in the pictures
03 Cobra block. - Came out of a running driveing cobra is what i am
told.
( i would really like to sell these local. So if your intrested let me know. Even if you want all three to resell i will cut you a bit of a package deal.)
Heads:
1 - complete b-series head off a Mark VIII
1- complete b-series head off a 98 cobra
1- b series head off a 98 cobra - casing is pitted to hell and is not
useable.
1- b series head off a Mark VIII - Cams were removed from above
pitted cobra head and are awaiting installation into this head. This
head has been hot tanked and milled at a local machine shop. This will
give you two good "98 cobra" heads to work with.
Internals:
Forged 03 cobra crank
Forged 03 cobra rods
Sealed power 03 cobra pistons. These came out of a 03 cobra that had a
crack in the block. They appear to be in good condition. I had also
jsut installed new rings and noticed no visible damage. However, I am
no machine shop.
Mark VIII Crank
Mark VIII Rods
Mark VIII Pistons
All Mark VII stuff listed above was out of a running motor with unknown
mileage on the car.
Accessories:
Full Mark VIII intake
Mark VIII Water pump
Mark VIII oil pan
TWO sets of front covers
TWO sets of Valve covers
Three sets of fuel rails.
98 Cobra Intake setup
Two sets of timing chains
Two oil pumps
Misc grears and pullies
Misc fuel injectors
Wiring harness - - not sure what its from, it was off of a group parts
purchase i made and just came with the deal.
Other misc parts and pieces pictured in the box.
Alot of these parts are boughten in package deals and are in unknown
condition. Everything appears to be good and useful to my knowledge.
free feel to ask for more pictures or information and i will do what i
can to get it to you.
You take everything for $2250 OBO
Willing to part it out and starting to now. Ask for prices or Throw a reasonable offer my way.
Any more questions let me know.. Reply here or text me at 515 4 one 9 47 seventy. Thanks.
Here is the CL add also THERE ARE A FEW PICS ON HERE.
http://desmoines.craigslist.org/pts/3144268634.html
Blocks:
Aluminum Teskid block out of a 98 Cobra. - No main caps or main bolts
Aluminum Teskid block bored .30 over. - currently at the machine shop
getting decked so its not in the pictures
03 Cobra block. - Came out of a running driveing cobra is what i am
told.
( i would really like to sell these local. So if your intrested let me know. Even if you want all three to resell i will cut you a bit of a package deal.)
Heads:
1 - complete b-series head off a Mark VIII
1- complete b-series head off a 98 cobra
1- b series head off a 98 cobra - casing is pitted to hell and is not
useable.
1- b series head off a Mark VIII - Cams were removed from above
pitted cobra head and are awaiting installation into this head. This
head has been hot tanked and milled at a local machine shop. This will
give you two good "98 cobra" heads to work with.
Internals:
Forged 03 cobra crank
Forged 03 cobra rods
Sealed power 03 cobra pistons. These came out of a 03 cobra that had a
crack in the block. They appear to be in good condition. I had also
jsut installed new rings and noticed no visible damage. However, I am
no machine shop.
Mark VIII Crank
Mark VIII Rods
Mark VIII Pistons
All Mark VII stuff listed above was out of a running motor with unknown
mileage on the car.
Accessories:
Full Mark VIII intake
Mark VIII Water pump
Mark VIII oil pan
TWO sets of front covers
TWO sets of Valve covers
Three sets of fuel rails.
98 Cobra Intake setup
Two sets of timing chains
Two oil pumps
Misc grears and pullies
Misc fuel injectors
Wiring harness - - not sure what its from, it was off of a group parts
purchase i made and just came with the deal.
Other misc parts and pieces pictured in the box.
Alot of these parts are boughten in package deals and are in unknown
condition. Everything appears to be good and useful to my knowledge.
free feel to ask for more pictures or information and i will do what i
can to get it to you.
You take everything for $2250 OBO
Willing to part it out and starting to now. Ask for prices or Throw a reasonable offer my way.
Any more questions let me know.. Reply here or text me at 515 4 one 9 47 seventy. Thanks.
Here is the CL add also THERE ARE A FEW PICS ON HERE.
http://desmoines.craigslist.org/pts/3144268634.html