fuel line mounting

[Domestic Disturbance]

How do most of you mount your oversized fuel lines? I don't know what size is on my car off the top of my head, but I did purchase clamps for it awhile ago. I just dont want to screw a bunch of holes in my car. Any better options?

[Deimos]

big zip ties, big hose clamps or the right way of cushioned clamps with grip nuts

[DustinsDuster]

are they soft lines or hard lines? if they were hard lines i wouldnt worry about too many straps.

[Domestic Disturbance]

soft line. I have cushion clamps already, just not mounted.

[Sleepy]

Granted there would still be holes, however you could use rivets. At least that way they are clean when removed.

[Scott]

Weld the bolts to the frame/body and use that as a stud would be an option if you dont want to drill holes. I just drill a small pilot and screw in a self tapper call it good. If its a show car you can order fancy colored or polished alum clamps that hold single or multiple hoses

[Domestic Disturbance]

I don't want to run self taping screws if I don't have to. It'll be a full interior car and font want them poking up

[DustinsDuster]

fasten the lines to the frame rail, not the floor.

[Domestic Disturbance]

There isn't a frame

[Sleepy]

The cleanest way I can think to do it. Thinking of the inside and the outside would be to drill a hole, use a stud with a flat head for the inside of the car and then a locking nut to hold the clamp on.