My slow S-turd

[Deimos]

The beautiful truck

bought here http://iowaautoforums.com/showthread.php?11197-84-s10-350-th350/page4

http://i834.photobucket.com/albums/zz267/deimos140/IMG_1805.jpg

The s10 floor boards after a good treatment of POR15

http://i834.photobucket.com/albums/zz267/deimos140/IMG_1801.jpg

http://i834.photobucket.com/albums/zz267/deimos140/IMG_1800.jpg

The old engine pics

http://i834.photobucket.com/albums/zz267/deimos140/IMG_1745.jpg

New bullet

http://i834.photobucket.com/albums/zz267/deimos140/IMG_1803.jpg

The bullet sans the accessories

http://i834.photobucket.com/albums/zz267/deimos140/newengine2.jpg

The s10's soon to be new rear brakes and axles

http://i834.photobucket.com/albums/zz267/deimos140/brakes.jpg

The rearend

http://i834.photobucket.com/albums/zz267/deimos140/backhalf.jpg

Starting at the front and working my way back.

[Deimos]

My new front...

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4098.jpg

Suspension

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4099.jpg

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4101.jpg

Engine pics (ready to be pulled)

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4100.jpg

[Deimos]

Pic of cross member from top

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4588.jpg

Subframe from front

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4589.jpg

[Deimos]

Here is the whole 427 SBC just after the swap.

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4597.jpg

Engine mount photo

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4596.jpg

Front view

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4594.jpg

The engine mount bolts totally sucked to get in. I just left the transmission cooler lines and the engine oil lines on and swapped them over.

[Deimos]

Side view
http://i834.photobucket.com/albums/zz267/deimos140/IMG_4601.jpg

Front view with raidator support cut out to fit the new radiator
http://i834.photobucket.com/albums/zz267/deimos140/IMG_4600.jpg

Rear spring height (I know the rear frame needs cleaned)
http://i834.photobucket.com/albums/zz267/deimos140/IMG_4599.jpg

Sideveiw of truck. That is a 5 inch drop total in front with drag springs (it needs to settle)
http://i834.photobucket.com/albums/zz267/deimos140/IMG_4598.jpg
I hate the rust that formed

[sLoWnStEaDy]

Is that the one that was listed on here that you beat me to a while back?

[Deimos]

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4604.jpg

[Deimos]

Is that the one that was listed on here that you beat me to a while back?

yes

[Deimos]

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4602.jpg

[Deimos]

Did some work today

Cut out lower radiator support

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4625.jpg

Cut out upper rad. support

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4629.jpg

Grip zerk and hole I drilled

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4626.jpg

Hard to see but lower support and mounts for radiator

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4627.jpg

The radiator installed for mock up looks like a good fit for a 28 x 19

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4628.jpg

[Deimos]

So I got a little work done today...

Housing end...

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4650.jpg

Passenger Side

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4651.jpg

Drivers side axle tube

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4652.jpg

The only down side is the guy who narrowed the rear cut the wrong axle so I now have a one legged wonder.

[Deimos]

Ok here it goes...

Cross member fully installed

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4728.jpg

Engine front view

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4727.jpg

Rear differential side view

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4726.jpg

Brace modifications

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4725.jpg

Rear view

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4724.jpg

[Deimos]

rear shot

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4832.jpg

drivers side

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4833.jpg

passenger side

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4834.jpg

clutch be gone (created the brake problem lol)

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4835.jpg

[Deimos]

The steering wheel adapter...

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4853.jpg

the steering wheel installed...

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4852.jpg

the welded in bung
http://i834.photobucket.com/albums/zz267/deimos140/IMG_4857.jpg

the wideband 02 installed...

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4854.jpg

[Deimos]

Drivers frame roll bar pic

http://i834.photobucket.com/albums/zz267/deimos140/DSCN0112.jpg

Passenger frame roll bar pic

http://i834.photobucket.com/albums/zz267/deimos140/DSCN0114.jpg

Rear roll bar pic

http://i834.photobucket.com/albums/zz267/deimos140/DSCN0113.jpg

Front roll bar pic

http://i834.photobucket.com/albums/zz267/deimos140/DSCN0115.jpg

Top roll bar pic

http://i834.photobucket.com/albums/zz267/deimos140/DSCN0116.jpg

rear roll bar welds

http://i834.photobucket.com/albums/zz267/deimos140/DSCN0117.jpg

Floor plate

http://i834.photobucket.com/albums/zz267/deimos140/DSCN0118.jpg

Under cab roll bar pic

http://i834.photobucket.com/albums/zz267/deimos140/DSCN0119.jpg

Where it attaches to frame

http://i834.photobucket.com/albums/zz267/deimos140/DSCN0120.jpg

Swing out pic

http://i834.photobucket.com/albums/zz267/deimos140/DSCN0121.jpg

Seats that are going bye bye hopefully but damn they were comfy

http://i834.photobucket.com/albums/zz267/deimos140/DSCN0122.jpg

because i wanted to

http://i834.photobucket.com/albums/zz267/deimos140/DSCN0123.jpg

[Deimos]

rear frame finally por 15ed.

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4921.jpg

seat and cage with repor15ed floor

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4920.jpg

the magic not fitting starter for sale lol

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4919.jpg

Oil filter mounting

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4917.jpg

pass thru coil adapter

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4916.jpg

Carb and throttle bracket installed

http://i834.photobucket.com/albums/zz267/deimos140/IMG_4915.jpg

[Deimos]

The oil filter mounted and tight

http://i834.photobucket.com/albums/zz267/deimos140/IMG_5704.jpg

Underside of roll cage

http://i834.photobucket.com/albums/zz267/deimos140/IMG_5705.jpg

her seat

http://i834.photobucket.com/albums/zz267/deimos140/IMG_5706.jpg

My seat

http://i834.photobucket.com/albums/zz267/deimos140/IMG_5707.jpg

Me POR 15 the truck bed

http://i834.photobucket.com/albums/zz267/deimos140/IMG_5708.jpg

[Deimos]

new pics

http://i834.photobucket.com/albums/zz267/deimos140/IMG_5728.jpg


http://i834.photobucket.com/albums/zz267/deimos140/IMG_5729.jpg

back
http://i834.photobucket.com/albums/zz267/deimos140/IMG_5730.jpg

[Deimos]

Rear cage
http://i834.photobucket.com/albums/zz267/deimos140/IMG_5812.jpg

second rear cage pic

http://i834.photobucket.com/albums/zz267/deimos140/IMG_5813.jpg

Driveshaft loop and crossmember

http://i834.photobucket.com/albums/zz267/deimos140/IMG_5813.jpg

different view

http://i834.photobucket.com/albums/zz267/deimos140/IMG_5816.jpg

seats are mounted

http://i834.photobucket.com/albums/zz267/deimos140/IMG_5810.jpg

Boxed frame welds

http://i834.photobucket.com/albums/zz267/deimos140/IMG_5817.jpg

less zoomed box frame

http://i834.photobucket.com/albums/zz267/deimos140/IMG_5818.jpg

Cage mount at window

http://i834.photobucket.com/albums/zz267/deimos140/IMG_5819.jpg

cage mount at truck bed

http://i834.photobucket.com/albums/zz267/deimos140/IMG_5820.jpg

block off panel

http://i834.photobucket.com/albums/zz267/deimos140/IMG_5821.jpg

[Deimos]

for Jeff...
http://i834.photobucket.com/albums/zz267/deimos140/IMG_5822.jpg

Seat mounts
http://i834.photobucket.com/albums/zz267/deimos140/IMG_5823.jpg

another seat mount
http://i834.photobucket.com/albums/zz267/deimos140/IMG_5824.jpg

switch panel installed
http://i834.photobucket.com/albums/zz267/deimos140/IMG_5825.jpg

Bed is painted
http://i834.photobucket.com/albums/zz267/deimos140/IMG_5826.jpg

[Deimos]

New seat cover

http://i834.photobucket.com/albums/zz267/deimos140/IMG_6875.jpg

Coil and digital 7 mounted

http://i834.photobucket.com/albums/zz267/deimos140/IMG_6876.jpg

fronts together finally

http://i834.photobucket.com/albums/zz267/deimos140/IMG_6879.jpg

behind drivers door rust patch

http://i834.photobucket.com/albums/zz267/deimos140/IMG_6877.jpg

Under driver's door rust hole

http://i834.photobucket.com/albums/zz267/deimos140/IMG_6878.jpg

[Deimos]

Brake lines pics
http://i834.photobucket.com/albums/zz267/deimos140/IMAG0012.jpg

Shifter mount
http://i834.photobucket.com/albums/zz267/deimos140/IMAG0011.jpg

Her seat

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0010.jpg

My seat
http://i834.photobucket.com/albums/zz267/deimos140/IMAG0009.jpg

Driveshaft loop
http://i834.photobucket.com/albums/zz267/deimos140/IMAG0008.jpg

Frame pics
http://i834.photobucket.com/albums/zz267/deimos140/IMAG0007.jpg

[Deimos]

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0019.jpg

nano is in

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0024.jpg

Fuel is hooked up

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0026.jpg

Battery shut off

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0027.jpg

Out with the old windshield

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0028.jpg

In with the new

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0029.jpg

[Deimos]

Too much time spent today only 28 to go

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0035.jpg



Gauges mounted

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0036.jpg



Vacuum pump mounted

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0034.jpg

[Deimos]

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0048.jpg

http://i834.photobucket.com/albums/zz267/deimos140/th_VIDEO0008.jpg (http://s834.photobucket.com/albums/zz267/deimos140/?action=view&current=VIDEO0008.mp4)

[Deimos]

http://www.youtube.com/watch?v=P2PX4QZVc4s

[Deimos]

http://i1116.photobucket.com/albums/k565/jrettenmaier/th_video-2011-08-31-17-38-41.jpg (http://s1116.photobucket.com/albums/k565/jrettenmaier/?action=view&current=video-2011-08-31-17-38-41.mp4)

http://i1116.photobucket.com/albums/k565/jrettenmaier/th_video-2011-08-31-17-40-26.jpg (http://s1116.photobucket.com/albums/k565/jrettenmaier/?action=view&current=video-2011-08-31-17-40-26.mp4)

[sLoWnStEaDy]

What the heck you doing all the way over by Jules?

EDIT: looking at the pics, looks like you are at that little shop/car lot deal right across from Jules? Always wondered what was up with that place?

[Deimos]

What the heck you doing all the way over by Jules?

EDIT: looking at the pics, looks like you are at that little shop/car lot deal right across from Jules? Always wondered what was up with that place?

Thats my full time job. Full service shop and I dig it way more than sears. The neighbors were pissed and did you see the rendevous almost rearend me?

[sLoWnStEaDy]

Didn't know you left Sears, Congrats. Didn't see the rendevous, is it in one of the videos? Honestly, I didn't even notice you had posted videos, just thought those where pics. LOL

[Deimos]

lol too many pics but its a build thread and that is cliff notes of the actual build thread, and it was one hell of a thrash. I work sears saturdays.

BTW no secrets with me.

[GT35Lude]

why the big ass radiator? would one that fit the front with out cutting all the supports work just fine? maybe go thicker instead of taller? just wondering. nice build.

[Deimos]

Good question. I could have used the stock radiator support but now it is easier to cheat to get the engine and trans out. Besides plans are to copy Jeremy's template or have him bring me one at bowling green for a different mount.

[Deimos]

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0019-1.jpg

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0002.jpg

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0001.jpg

I think that's it.

[BGjohnson]

Really nice man. Welds look great, top notch job on everything. Looks like you will have fun with it.

[Deimos]

H and W did the welding I cant weld to save my life.

[FiFdYnUtZ]

if i gave you a dollar, would you tuck the rear wheels please?

[Deimos]

Oh yeah the new rears are already here. Getting fitted with some 275 60 15's radials thought you knew that.

[GT35Lude]

well if it makes swapping the motor easier im all for it.

[AutoMods]

looks like a ton of work went into that. should be fast and reliable one you get everything figured out. what are the specs on the rear end?

[Deimos]

Its a FAB 9 with mosier center section and mosier 35 spline axles

[Deimos]

The leaf spring slider H and W welded for me

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0066.jpg

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0065.jpg
So I installed the spacer but broke the throttle cable mount for the carb... Oh well easy fix.

[Deimos]

Oh yeah say HI to my timing monster

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0028-1.jpg

I'm pretty bored wrapping christmas presents...

[Deimos]

before

http://i834.photobucket.com/albums/zz267/deimos140/IMG_5729.jpg

After

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0080.jpg

[JustinS]

Looks good Jake!

[KobleTsi]

Did this truck come from hillsdale/morrison illinois? Looks exactly like one I looked at last year

[Deimos]

Nah I bought it from stutz. I think I seen who you were talking about. There is a dude on facebook that has the same exact truck down to the pinstriping.

[KobleTsi]

must be, i looked at buying it a year or two ago for like 3 or 400 bucks as a roller, didnt have a bed on it though.

[Deimos]

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0085.jpg

I think its says it wants a race STUTZ

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0083.jpg

[Scott]

the pipe threads on a nitrous system should have paste sealer on them instead of the tape, even a small piece of that tape will make a solenoid leak.. just a fyi

[Deimos]

nick scavo said so lol

[AutoMods]

I don't know what my deal is but I seem to have better luck with teflon tape sealing on npt threads. Not talking nitrous specifically but on fuel fittings, regulators and most recently I tried harvey's teflon paste from lowes on some air compressor fittings and some of my connections were leaking. Redid them with tape and it was sealed first try.

[Deimos]

Pretty sure it was scavo only now I cant find the vids. Anyways says to use tape cuz its better and not to install the parts too tight.

[Scott]

yea I do agree the tape seems to seal better, even the instructions for the nitrous kit and Steve at Induction solutions also told me not to use it.. I think a leaking fitting would be better than a internal leak on a solenoid blowing the intake off the engine

[Stutz]

I think its says it wants a race STUTZ


When?

[Deimos]

april 16th?

[Deimos]

http://i834.photobucket.com/albums/zz267/deimos140/IMG_5728.jpg
before

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0091.jpg

after

should I go another inch?

[Domestic Disturbance]

looks good. Polish up the front wheel though.

[Deimos]

I got something for you to polish lol

[AutoMods]

looks better. i'd try to go a bit more if you can. the rear at least

[Caleb]

Jake I am actually really happy for you man. Been so long since you had a real toy to play with and now you got one, not only that, it looks good too. Would be nice to see a cleaned up interior, a hood, and 3-4" exhaust with mufflers lol. Gonna be a badass this year, you'll smoke me haha.

[Deimos]

Plans are for my secret weapon then bumper and hood. I like my interior. Exhaust I gotta ask somebody

[Deimos]

http://www.msdvideos.com/video/11213

http://www.youtube.com/watch?v=rk3bGYf0zu0

http://www.youtube.com/watch?v=jlJzGVh8sBU&feature=related

http://www.youtube.com/watch?v=vwzoFPUhC7s&feature=related

http://www.youtube.com/watch?v=76iVpIqjiK4&feature=related

http://www.youtube.com/watch?v=BC3SmWO5ygk&feature=results_video&playnext=1&list=PL36876B9EC8FBC29C

yeah I can't edit this in two minutes

[Deimos]

http://rockracingbattery.com/product.php?productid=17529&cat=3&page=1

[Deimos]

http://www.youtube.com/watch?v=SOc9SBMqA6I

[Deimos]

http://static.summitracing.com/global/images/instructions/msd-7530t_frm29417.pdf

[Deimos]

http://www.summitracing.com/parts/QFT-18-4/

[Deimos]

new switch panel

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0110.jpg

some problems

http://i834.photobucket.com/albums/zz267/deimos140/2012060295105908.jpg
http://i834.photobucket.com/albums/zz267/deimos140/2012060295103634.jpg

Griner
install http://i834.photobucket.com/albums/zz267/deimos140/IMAG0104.jpg

[Deimos]

reason why I went to arc not a fun trip to the track

[AutoMods]

be honest, how often do you go to the garage and hit those buttons?

whats going on with your tire?

[Deimos]

Damn thing died right out of the gate. Not bad for the fuel pump turning off.

[Deimos]

be honest, how often do you go to the garage and hit those buttons?

whats going on with your tire?

I start it weekly. I might be heading down to moline if mustang mike dont pick me up some c16. Im having problems embedding the photobucket link so I may have to switch it to youtube.

As for the fenders they got shaved. However I have been on a performance parts buying freeze until I can get a clean pass out of it. So hopefully after august I will be good.

[Deimos]

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0095.jpg

[Deimos]

for batwood http://i834.photobucket.com/albums/zz267/deimos140/IMAG0081.jpg

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0021-2.jpg

tiz the project she wont let me drive.

[Deimos]

obviously before the grille and ground effects

[sparkles]

I'd be interested in the firearms if I hadn't just acquired 25 new ones.

[Deimos]

I'd be interested in the firearms if I hadn't just acquired 25 new ones.
was that meant for slow n steady?

[sparkles]

Hmm...weird

[Deimos]

http://www.summitracing.com/parts/HOK-12385HKR/

[Deimos]

http://www.summitracing.com/parts/WLK-41222/

[Deimos]

Alot of plumbing boss

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0125.jpg

Engine bay switch panel

http://i834.photobucket.com/albums/zz267/deimos140/IMAG0128.jpg

[Mike@Salkowski-Motorsport]

Looks good. You spray it yet?

[Deimos]

I took of a stage, but looks like the perfect weather to spray next weekend.