PDA

View Full Version : Unusual Engines. Big, Little, bad or good.



Drifte
10-26-2011, 12:04 PM
I came accross this and had to share. List any you may know of that seem out of the norm.

British Racing V16. 600bhp at 12,000RPM

built for formula one.

1.5 litre (90.8 cubic inch).
http://upload.wikimedia.org/wikipedia/commons/thumb/7/79/1950_BRM_Type_15.JPG/800px-1950_BRM_Type_15.JPG


http://www.youtube.com/watch?v=fZMPDCNyQxE

sLoWnStEaDy
10-26-2011, 07:01 PM
nothing to add but that is bad ass!

Drifte
10-27-2011, 09:12 AM
Honda RC149

The crankshaft has a special configuration: the three cylinder part has the crank pins at 120 degrees, the two cylinder part has the crank pins, in the usual Honda fashion, at 180 degrees. Both crankshaft are coupled together at the position of the camshaft drive.

150cc 5 cylinder 8spd transmission

38 bhp at 20,500 rpm

the RC116 makes peak hp at 21,500 rpm

http://www.nexialquest.com/westcoastcbx/rc149tach.jpg
http://www.nexialquest.com/westcoastcbx/rc149.gif
http://www.cyclechaos.com/images/a/ae/Honda-RC143-riden-by-Suiss-rider-Luigi-Tatcri.jpg

black88gt
10-27-2011, 09:32 AM
Holy fuckballs 21500

black88gt
10-27-2011, 09:43 AM
Newer but I thought this was interesting

http://www.youtube.com/watch?v=HIxngbwE8jg

Flat plane LS, 358 CI
621 @ 9000 N/A

I guess theyre going to boost it

85XR7Project
10-27-2011, 11:24 AM
This is the cizeta, yes it does look like the Lamborghini Diablo that is because he designed it and was fired so he decided to make a better car. (Or something like that)

It has a transversely mounted V16.

http://media.moddb.com/images/groups/1/3/2590/cizeta_v16t_img01.jpg

http://archive.caranddriver.com/var/ezflow_site/storage/images/media/images/cizeta-inline/3900092-1-eng-US/cizeta-inline_cd_gallery.jpg


http://www.youtube.com/watch?v=XOfmcfPsLwo&feature=related

Next, Commer TS3.
air-cooled, twin-crankshaft, 4.0-liter flat-twin driving the rear wheels. One crank lived above the other, and each piston had three connecting rods—two light outer ones and a heavier one in the center. The light rods went to one crank, the heavy rods to the other, and the two shafts counterrotated. The result was 10.5 hp at 1250 rpm. Crazy.


http://www.youtube.com/watch?v=JrAoj5Cuu68

Check out the Chrysler multibank sometime, that shit is nuts.

derek072887
10-27-2011, 03:47 PM
is that a gear driven supercharger on the front of the commer TS3? pretty sweet configuration

on of my favorites is the Miller Cycle engine that mazda used in some millenia's

85XR7Project
10-27-2011, 05:44 PM
Yeah it appears to be.

Domestic Disturbance
10-28-2011, 02:13 AM
Auburn Speedster supercharger sits horizontal to the engine.
http://www.cordhaven.com/EBAY/AuburnSpeedster/Chassis-Engine/web/Picture5599478.jpg

Tatra makes some pretty crazy looking air cooled engines too
http://jonthecomposer.com/WEB/WEB%20pics/motor.jpg
http://upload.wikimedia.org/wikipedia/commons/thumb/3/37/Tatra_T955_engine.JPG/800px-Tatra_T955_engine.JPG

DustinsDuster
11-01-2011, 03:48 PM
this whole car is awesome, but the mini engine is amazing:

http://www.youtube.com/watch?v=kGPw1hGTdYo

Drifte
11-04-2011, 08:56 AM
this whole car is awesome, but the mini engine is amazing:

http://www.youtube.com/watch?v=kGPw1hGTdYo

Love that build. Was just hunting for the Sherman ww2 tank engine in a mustang thread. That motors impressive since its a 1940's DOHC 4 valve per cylinder motor. Kinda high tech.

Domestic Disturbance
11-05-2011, 03:05 PM
Not an engine, but still very unusual and unlikely. A little box of crystals thats suppose to realign the molecules in fuel to perform optimally.
http://www.beaterblog.com/2011/10/db-energy-polarizer-device-that-ended.html

LT1Dan
11-15-2011, 05:14 PM
TINY V4 engine that actually runs. Videos are towards the end of the page.

http://www.floridaame.org/GalleryPages/g1M0348.htm

86svo9L
11-15-2011, 06:45 PM
That engine sounds good, probably one of the best sounding model engines I have heard.

Drifte
11-16-2011, 09:51 AM
That did sound awesome.

DustinsDuster
11-20-2011, 02:19 PM
how about an engine even smaller than that, with 12 cylinders!:


http://www.youtube.com/watch?v=3YfTtGCsiD8

85XR7Project
11-20-2011, 06:22 PM
I just watched that on Jalopnik today. That is badass. Its amazing what these guys are capable of. I never really knew that this was going on until a few years ago while messing around on youtube. I'm sure it'd be a neat engineering exersize to design your own engine and all. It'd be cool if someone made a DOHC engine.

Domestic Disturbance
11-21-2011, 02:30 AM
Took me a minute but here ya go. OHC W9. Being run mechanically, not on its own, but still nuts

http://www.youtube.com/watch?v=XEdo9JO24iU&feature=BFa&list=PL491AA8B70C1E6B5A&lf=results_main

Also a motorcylce that have an lsx based v4 engine in it. I think it sounds amazing
http://www.lsxtv.com/news/video-motus-kmv4-motorcycle-engine-is-half-an-ls7



http://www.youtube.com/watch?v=FhaRdPJI3sU&feature=channel_video_title

Drifte
11-21-2011, 07:23 AM
^ Thats a cool touring bike. 160hp, 120 torque, 500lbs without saddle bags. Its interesting to read, bikes are typically known for very advanced technology and this one is back to the keep it simple mind set and it works. Id really like to hear it Rev to the 7800rpm red line.

Grr
11-21-2011, 07:45 PM
http://www.youtube.com/watch?v=qqp99nIjbWw

Drifte
11-21-2011, 08:28 PM
http://www.youtube.com/watch?v=qqp99nIjbWw

I was completely clueless it was miniature until he reached out and touched it.

Grr
11-22-2011, 05:23 AM
yeah me too, i thought it was just a short rail with like a big block olds in it or something till he stuck mr. hand in there. this thing is so awesome

JustinS
12-03-2011, 08:23 AM
.Honda's NR (New Racing) V-four motorcycle engine series started in 1979 with the 500cc NR500 Grand Prix racer that used oval pistons.[1] This was followed during the 1980s by a 750cc endurance racer version known as the NR750. The oval piston concept allowed for eight valves per cylinder which generated more power due to the increased air/fuel mixture throughput and compression. In 1992 Honda produced around 300 street versions of a 750cc model, the NR (often mistakenly referred to as the NR750), with a 90-degree V angle. Whereas the NR500 had used an oval piston with straight sides, the road going NR750 used an elliptical piston with curved long sides. The bike became the most expensive production bike at the time when it was selling for $50,000 and with the rarity, nowadays they rarely change hands.
http://en.m.wikipedia.org/wiki/Honda_NR

Oval pistons with two rods per piston!
http://i379.photobucket.com/albums/oo239/sbrar-15/1559c67a.jpg

Drifte
12-05-2011, 09:10 AM
That one is strange, seems like it might as well have 8 pistons, one for each rod. But I think I read it was in a class that it had to have 4 or something. Which is actually a hilarious loop hole they found. Such a rare bike too.

black88gt
12-08-2011, 10:05 AM
http://smith-power.com/yahoo_site_admin/assets/images/6293553883_15ca865a9c_b.321144106_std.jpg

12 rotor engine

http://www.youtube.com/watch?v=KBOGCljbLsA&feature=player_embedded

http://www.smith-power.com/r12

Drifte
12-08-2011, 10:13 AM
"Turbo-charged 50 lbs boost (race fuel 116 octane) 5,400 hp at 11,000 rpm Drag racing version."

wow

Scott
12-08-2011, 11:46 AM
That 12 rotor is awesome!! But holy crap is it heavy for a car

Domestic Disturbance
12-09-2011, 12:08 AM
I want to see a cutaway!