PDA

View Full Version : Windsor Go Fast Parts.


BUCKETT
10-22-2011, 09:57 PM
I have hurt this thing for the last time. Selling the engine and other parts.

AFR 225 heads with T&D shaft rockers. Heads will be fresh from Huaf. Upgraded valve and ty retainers $1500
no pics heads at haufs

Kooks 2 inch headers that have been jet hot coated also have kooks 3 inch X pipe. 9.5 deck windsor $750 for both.
http://i613.photobucket.com/albums/tt220/BUCKETT388/vacuumpump033.jpg

Scat Billet Crank never been cut. zero balance. $1500
http://i613.photobucket.com/albums/tt220/BUCKETT388/crankandrods003.jpg
http://i613.photobucket.com/albums/tt220/BUCKETT388/crankandrods009.jpg

Oviler billet rods 6.200 $800
http://i613.photobucket.com/albums/tt220/BUCKETT388/crankandrods010.jpg
http://i613.photobucket.com/albums/tt220/BUCKETT388/crankandrods011.jpg

SVO 9.5 351 Windsor "W" block. 4.155 bore. Will be fresh bore and deck plate hone from Hauf. $1000
Block at haufs no pipc yet

GZ Motorsports 104 vacuum pump kit. $700
http://i613.photobucket.com/albums/tt220/BUCKETT388/vacuumpump025.jpg
http://i613.photobucket.com/albums/tt220/BUCKETT388/vacuumpump026.jpg
http://i613.photobucket.com/albums/tt220/BUCKETT388/vacuumpump031.jpg

OBO on all this stuff. i have more parts also. Most know the car and know what it has. I have tons of pics of this stuff on photo bucket. I can send pics.
BUCKETT
10-22-2011, 09:58 PM
515-971-9384 ask for john. Thanks.
snickerlicker
10-22-2011, 11:11 PM
Time for a Coyote motor!!
BUCKETT
10-23-2011, 12:23 AM
That is the plan.
black88gt
10-23-2011, 11:24 AM
Willing to separate the headers from the X? Just interested in the midpipe
BUCKETT
10-23-2011, 11:26 AM
yes i can but it is all welded up. are you sure you can make it fit for what you need?
black88gt
10-24-2011, 08:58 AM
yes i can but it is all welded up. are you sure you can make it fit for what you need?

I'll have to do a little more research, wanted to check if you'd separate before I did. Difference is the 9.5 vs. 8.2, otherwise 3" collector on the ones I've got. I guess I should have asked earlier did it come off a fox/sn95?
K-ville
10-26-2011, 05:00 PM
they are off his fox/capri
Scott
10-26-2011, 08:58 PM
I'll have to do a little more research, wanted to check if you'd separate before I did. Difference is the 9.5 vs. 8.2, otherwise 3" collector on the ones I've got. I guess I should have asked earlier did it come off a fox/sn95?

Unless your running the same headers he has with the same deck height engine and a similar head the X-pipe will probably have to be cut and re welded to widen or shorten it in order to fit.. should be a piece of cake if you have a angle grinder and a welder though
black88gt
10-26-2011, 11:32 PM
Unless your running the same headers he has with the same deck height engine and a similar head the X-pipe will probably have to be cut and re welded to widen or shorten it in order to fit.. should be a piece of cake if you have a angle grinder and a welder though

Thats what I planned on. I have yet to find a 2" X that bolts up w/o any modification anyway
Scott
10-27-2011, 04:44 PM
I can make it fit for minimal fee if you can get it over to my house..