sparkles
07-06-2011, 04:57 PM
Long story short, bought this cam for my new motor. Took it to the dyno, and with my setup (E85), my tuner said it would be better and more drivable on the street if I get something smaller. It's in the car. You can hear it run. Still have the box and paperwork. Probably doesn't have 20 miles on it. Hydraulic Roller Tappet. Pretty big. Set up for blocks originally equipped with factory roller lifters (ie 87 and later). It would work on earlier blocks with a cam button also. 8-468-8 is the part number.
Specs:
http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=177&sb=0
I paid a little $310 from JR Motorsports for it, but it's cheaper on Summit:
http://www.summitracing.com/parts/CCA-08-468-8/
Looking for $200
Specs:
http://www.compcams.com/Company/CC/cam-specs/Details.aspx?csid=177&sb=0
I paid a little $310 from JR Motorsports for it, but it's cheaper on Summit:
http://www.summitracing.com/parts/CCA-08-468-8/
Looking for $200