RX7 Roller

[clutchmuch]

Well fuck it. i guess im selling this to finish paying steady since i decided to buy the whole body and owe him another 300. And need exhaust fabbed. And need to buy a shifter so he can have his back.

Very clean. 90k on body, Little Under body rust none anywhere else, not going to fall apart i promise. Missing the Black middle trim on the doors. Will come with the white lights from steadys rx7 since i took the red ones. All factory wiring is there. Gray leather seats. Walbro will stay in the tank as well.

$300 for the roller on stock suspension.
$500 w/ struts and adjustable coilovers.

Would like it if you towed it, but can arrange something if you cant

Ill take some pics tomorrow since its dark but you know what it looks like an rx7 obviously.

Also have the stock rotory and trans 90k on both, front rotor lost compression needs new seals.
$50 for block
$150 5spd trans OBO
Any other engine part you need $40 and under.

Pm or call/text.
3194310269, if you call, call after 4pm

http://img825.imageshack.us/img825/6940/imag0309d.jpg
http://img854.imageshack.us/img854/7913/imag0310kf.jpg
http://img96.imageshack.us/img96/1400/imag0312z.jpg
http://img571.imageshack.us/img571/168/imag0313d.jpg
http://img834.imageshack.us/img834/6052/imag0314h.jpg
http://img28.imageshack.us/img28/383/imag0315r.jpg
http://img59.imageshack.us/img59/1633/imag0316m.jpg
http://img801.imageshack.us/img801/4859/imag0317q.jpg

[clutchmuch]

http://img200.imageshack.us/img200/3189/imag0318it.jpg

[Drifte]

Why did you switch out the headlights?

[clutchmuch]

red ones already had the lights and sexy jdm stickers. idk i liked them lol

[Drifte]

If it still had the red headlights I would take it.

[clutchmuch]

If it still had the red headlights I would take it.

damn really, ok ill put them on if you want them

[Drifte]

damn really, ok ill put them on if you want them

I need to pay more attention to what im typing. I meant that as a joke, but def wouldnt mind having the shell. I was looking for a t2 shell though or one thats been done/ready for a swap. If I were you I would swap all the parts to this shell. If you decide thats to much work though, you can leave the red car in my driveway...I'll find something to do with it.

[AutoMods]

well if you consider the money your going to spend on paint and body work on keith's white car. you might be better off swapping everything to the red car.

[sLoWnStEaDy]

The one he got from me is solid and I mean SOLID, it only has like 40K miles on it, his is decent but not as good as mine. plus my old one has the 4.10 LSD, better brakes, and (no offense to you clutchmuch) I don't think they would have a good time trying to swap stuff over. besides the engine/trans/driveshaft/rearend, you'd also have the oil cooler, trans cooler, oil filter relocation stuff, fuel line, fuel pump, you would also have to do some cutting of the trans tunnel to get the shifter nice and flat like I did and some cutting under the hood as well as some welding. They would also have to rewire the ignition, fuel pump, and the starter/alternator stuff and much more...

Without trying to be a dick, they don't really have the mechanical inclination or tools needed to perform the tasks. My old car LOOKS rough but it doesn't need much at all to be finished. Give me a solid 6 hours and it would be ready for paint. I just got sick of the car after 5 years and since it left, I have gotten a decent start on my Mach One, as I planned...

[tmikula92]

I'd be all of this shell if I wanted an RX-7 Project. I can say I've seen that car many times and its a very clean shell. Great deal clutch and GLWS

[Garrett]

Sure wish you would have said you would sell it when I asked 1 week ago...

[clutchmuch]

Sure wish you would have said you would sell it when I asked 1 week ago...


Didnt think i was ever going to sell it. now i need too.

[Sleeping]

You want to part it out? I could use some parts. If not I may consider buying whole car. Send me some more pics of the interior. Sent you a pm with my number give me a call sometime maybe can work something out.

[85XR7Project]

The biggest thing I hated about keith's car was the rad support being all chopped up.

As for your sale, I wish I had the money man. I just can't afford it right now.

[sLoWnStEaDy]

The biggest thing I hated about keith's car was the rad support being all chopped up.

As for your sale, I wish I had the money man. I just can't afford it right now.

you mean the one sheet metal cross bar on top that was cut out? LOL just saying... even when they are intact, you can grab them and bend them with your hand, not like they really need to be there. I just wanted to fit a bigger aluminum radiator and I wanted the angle right and I wanted to have plenty of clearance between the engine and rad. fans, it all worked out.

[AutoMods]

^agreed, the rad support is minor and not very strong. i see other rx7's with that cut out too.

[sparkles]

I wish I had the room. I believe my next car will be an FC or FD swapped with a LSX...just to piss off Keith.

[sLoWnStEaDy]

I wish I had the room. I believe my next car will be an FC or FD swapped with a LSX...just to piss off Keith.

haha... you guys and your thinking I am some anti-LSx guy or something. My next project will be an LSx, just to shut you guys up! LOL, seriously though, I have had an LSx build planned for a short while now, just waiting for the right moment.

[sparkles]

I know. Just giving you shit. I'm leaning towards either that or a 50,51 pickup. Thought I had a line on one, but he sold it already.

[sLoWnStEaDy]

I know. Just giving you shit. I'm leaning towards either that or a 50,51 pickup. Thought I had a line on one, but he sold it already.

Oh really? that is kind of funny... Mine is either going to be an early 50's truck or Cadillac... Looked at a couple of each already but not quite what I was looking for. I am hoping to do a "rat rod", if you want to call it that. just grab something out of a field/barn, slap and engine/trans in it and go...

[Domestic Disturbance]

Lol I wanted to do a 55-57 truck with an lsx and irs forever, but 3 1/2 projects is enough

[85XR7Project]

Lol, I just don't like that one thing. That is all, don't take it personally.

[sLoWnStEaDy]

Lol, I just don't like that one thing. That is all, don't take it personally.

No problem... I was just stating it isn't anything important at all. A few people seen that and where like "I am surprised this car isn't buckling" LOL like it was some super important reinforcement/crossmember...

[clutchmuch]

Sold!

[sLoWnStEaDy]

Sold!

http://video.adultswim.com/family-guy/you-got-my-money.html

why didn't that link work?

[LT1Dan]

^ LOL nice.

[85XR7Project]

You got till five o'clock!