My '93 TSi about ready!

[slo4cyl]

I haven't really posted anything about my '93 but Ill start with the pics i have from this winter. I got the motor and trans back in tonight after a couple months of work. I still have a little bit to do, mainly wiring related, and I need new fuel injectors and she'll be ready to fire up. Here are a few crappy cell phone pics of the progress. I will get some better pictures when its all together and running

This is the only good picture I have of the car right now
http://i95.photobucket.com/albums/l142/slo4cyl/2010-09-03_19-11-33_275.jpg

http://i95.photobucket.com/albums/l142/slo4cyl/IMAG0067.jpg

Engine harness
http://i95.photobucket.com/albums/l142/slo4cyl/IMAG0066.jpg

The wires in my hand are being removed.
http://i95.photobucket.com/albums/l142/slo4cyl/IMAG0076.jpg

After
http://i95.photobucket.com/albums/l142/slo4cyl/IMAG0071.jpg

Engine side Bulk head connector
http://i95.photobucket.com/albums/l142/slo4cyl/IMAG0078.jpg

Motor completed yesterday
http://i95.photobucket.com/albums/l142/slo4cyl/IMAG0118.jpg

Back in tonight
http://i95.photobucket.com/albums/l142/slo4cyl/IMAG0119.jpg

[Xboosted23X]

look at that ass. O the car needs to be up and running. To bad it was windy that day and no full pass.

[oVa-Boost]

looking good!

[AutoMods]

Can't wait to see it make a good pass. Where did u get the bulk wire connector? I need one

[Drifte]

http://i95.photobucket.com/albums/l142/slo4cyl/2010-09-03_19-11-33_275.jpg

looks damn good.

[Ricky]

dont blow it up this time!
Cam still wants his bike vs your car race, he thinks you broke your car last year becease you were scared.

[slo4cyl]

Where did u get the bulk wire connector? I need one

I get them from work, how many pin do you need? I can get from 2 on up, mine is a 37 pin and that is about the biggest round one they have then they go rectangular.

And Eric tell cam Ill be ready for him. I didn't blow it up, but it sure was a costly miss shift. Looking back at it if I would have sent the head out to be checked I could have probably made it to the manual run off last year though :(... O well its a new year and were starting fresh lol

[TbTalon94]

Well since David and I will be doing a run together...might as well throw you in the mix. Might have to spray with you though :)

Lookin good though man, that new shell really takes the cake lol.

[FiFdYnUtZ]

lookin good brent!

[Ricky]

Well since David and I will be doing a run together...might as well throw you in the mix. Might have to spray with you though :)

Lookin good though man, that new shell really takes the cake lol.

OH SURE!!! you wont spray when im drunk in the back seat yelling "HIT THE BUTTON" but brent comes to town and lets spray now.... not happy!

[Drifte]

OH SURE!!! you wont spray when im drunk in the back seat yelling "HIT THE BUTTON" but brent comes to town and lets spray now.... not happy!

Yea thats total BS. But I can guess the outcome of the 6000lb wagon vs the 3000lb shell.

[TbTalon94]

lol oh yea the 3000lb shell will wax me, but it's all good in fun.

Eric i'm not going to spray the damn car with 6 people in it, 5.5 of them drunk!!

[Drifte]

who was half drunk? lol...must have been the driver. If I could remember I would know.

[Krumm]

lol oh yea the 3000lb shell will wax me, but it's all good in fun.

Eric i'm not going to spray the damn car with 6 people in it, 5.5 of them drunk!!

you had a baby driving?

[Xboosted23X]

I think both shells will be under 3k. I will just be lacking power compared to both vehicles. I'm just a lil stock turbo car.

[Ricky]

lol oh yea the 3000lb shell will wax me, but it's all good in fun.

Eric i'm not going to spray the damn car with 6 people in it, 5.5 of them drunk!!

I used to think you were cool...... lol thats ok. I forgot about the NOS pretty quick once the others in the back seat started "moving around" I had a front row view of every thing!

[TbTalon94]

yea don't be complaining fucker.

[Drifte]

Yea, 3 chicks broke in the TBSS, and all I remember is flipping the cutouts open and closed.

[Chicago_DSM]

Super clean and tons of high-quality parts! Quite the rarity in 1G's nowadays. Are you going to be tuning with Link, AEM or what? Also, what are the specs on the longblock?

[slo4cyl]

Super clean and tons of high-quality parts! Quite the rarity in 1G's nowadays. Are you going to be tuning with Link, AEM or what? Also, what are the specs on the longblock?

Thanks that's what everyone keeps sayin, its running on AEM, and the motor is just a built 2.0l, Mahle pistons eagle rods and crank, the head is mildly ported 1g head with supertech valves and gsc cams springs and retainers

[OldSkoolRCR]

Looks good Brent, but just looking at the pics is giving me flashbacks, and not good ones....Trevor, w/AWD LS power vs the Talon, call me for this one, But I got faith in ya Brent eventually you also will see the light...lol

[Sleeping]

Like see this run. You get any runs on that clutch I sold you

[slo4cyl]

Like see this run. You get any runs on that clutch I sold you

Ive only made that one pass with that clutch, we'll see how it does this year. And ed Ill be sure to call you, bring your car out and we'll just do both races in one night if we can.

[allgo]

I would like to race the talon to for fun of course..

[OldSkoolRCR]

Ive only made that one pass with that clutch, we'll see how it does this year. And ed Ill be sure to call you, bring your car out and we'll just do both races in one night if we can.


Sounds good.

[slo4cyl]

I would like to race the talon to for fun of course..

Sounds good to me, Ed told me to get ahold of you last year but then I had my "complications".

[slo4cyl]

well a friend loaned me a set of fuel injectors so I could get it running, going to check a few things and hopefully she fires up tonight!

[Ricky]

Make sure it has gas....

[slow ride]

And goes from 2nd to 3rd gear ;) I kid I kid

[oVa-Boost]

well a friend loaned me a set of fuel injectors so I could get it running, going to check a few things and hopefully she fires up tonight!

Bad ass hope everything goes well :)

[icwicked]

cant wait to see this thing in action!

[TbTalon94]

Well where's the picture update and video of it running?

[Stutz]

Looks damn good. Isnt the shell "evotuners" old one?

[JustinS]

Hurry up!

[slo4cyl]

Yea i believe it is evotuners old one. Im trying to be fast but not rush. I just got most the interior back in tonight, tomorrow ill wrap up the engine bay and maybe take it on a little drive tomorrow night or tuesday.

[Ricky]

whooooooooo! about time!

[slo4cyl]

whooooooooo! about time!

No kidding! Ill try and get a video up tonight

[slo4cyl]

Well I had some issues still left over from last season. I finally diagnosed it to a cam sensor, swapped it out and it was back to running 100% again. I have about 80 miles on it right now still running good, Ive done a few pulls and feels strong. Im waiting to get some more 110 and turn the boost up and hit the track. Im working on a camera mount to get a video and I should have pictures before the end of the week from the car show last saturday.

[Deimos]

F the pics we want vids damn it

[slo4cyl]

F the pics we want vids damn it

I'm working on it. I wish I had some spare money I would buy a gopro. But hopefully tomorrow I can make my mount on my breaks at work.

[AutoMods]

can't wait to see it run at the track and/or dyno !

[Drifte]

I feel like Ive worked on this car forever...and Ive never even layed a finger on it, must be all our phone conversations discussing parts! Im ready for a ride, 600whp and 10's.

[AutoMods]

brent you should do e85, that 110 is going to cost you this year. and its such a hassle to get 5 gallon jugs and its just not a happy feeling cruising around knowing your paying $8 a gallon

[slo4cyl]

brent you should do e85, that 110 is going to cost you this year. and its such a hassle to get 5 gallon jugs and its just not a happy feeling cruising around knowing your paying $8 a gallon

I'd love to do e85, and I'm going to, when I save up some money. I need about $800. This last 10 gallons is the last 110 I'm getting.

[icwicked]

the last time i got E85 my car had a 1/4 left and it cost 27 to fill up :)

[Ricky]

I'm working on it. I wish I had some spare money I would buy a gopro. But hopefully tomorrow I can make my mount on my breaks at work.

I know someone that you can barrow it from....

[slo4cyl]

I know someone that you can barrow it from....

Well I do to but they are 50 minutes away

[slo4cyl]

I got a few nice photos taken for the car show saturday, enjoy!

http://i434.photobucket.com/albums/qq62/andrew_woltjer/Photoshoot%207/DSC_0365.jpg

http://i434.photobucket.com/albums/qq62/andrew_woltjer/Photoshoot%207/DSC_0342.jpg

http://i434.photobucket.com/albums/qq62/andrew_woltjer/Photoshoot%207/DSC_0329.jpg

http://i434.photobucket.com/albums/qq62/andrew_woltjer/Photoshoot%207/DSC_0328.jpg

Dont mind the scratched manifold

http://i434.photobucket.com/albums/qq62/andrew_woltjer/Photoshoot%207/DSC_0327.jpg

[icwicked]

damn that thing is clean

[evotuner]

damn that thing is clean

That's my old car, dumbass!

[icwicked]

we talk about it but he got it from someone in des moines and i didnt know it went there from CR, dumbass :)

[AutoMods]

look great. nice to see a clean dsm still at it. when are you going to hit the dyno again?

[Xboosted23X]

He didn't get it from someone in des moines. Keger got it from evotuner and Brent got it from Keger in CR. Looking clean.
Are there more pics from the car show Brent? I didn't see any over at drag source.

[slo4cyl]

we talk about it but he got it from someone in des moines and i didnt know it went there from CR, dumbass :)

I got it from CR, I didn't know who he got it from I thought the guy was from DM but I was wrong.

[slo4cyl]

He didn't get it from someone in des moines. Keger got it from evotuner and Brent got it from Keger in CR. Looking clean.
Are there more pics from the car show Brent? I didn't see any over at drag source.

There is a link on lances facebook wall of the pics that woljter took.

And ryan Im not sure when Im going to try and get back to the dyno, probably when I switch to e85

[Xboosted23X]

My old car was from des moines. Got it from Andrew(Gimpster)

[icwicked]

oh ok so thats where i got that des moines from... its not a big deal

[evotuner]

Lol I just messin w/ ya wicked, car is looking sweet!

[Drifte]

Looks good, those pictures still dont do it justice. Photographer got crazy with the saturation slider!

[TbTalon94]

makes me sad that runner touched the hood :(

[slo4cyl]

makes me sad that runner touched the hood :(

makes me sad to

[TbTalon94]

makes me sad to

I guess the positive is, atleast it's performing!

[Ricky]

why did we hit cut that night? Is your WG working right?

[Drifte]

EBC ground. Believe he said its all good.

[slo4cyl]

why did we hit cut that night? Is your WG working right?

Yea everything is working fine I had a loose ground as Colton stated and that fixed it. It's time to turn the boost up when I finish a few little things inside

[slo4cyl]

Well I still haven't had any luck getting a video edited together, my computer isn't able to do anything with mp4s. Drifte has all my footage so Im hoping he gets something together soon. Here are some pics of a couple things Ive been working on this winter.

http://i95.photobucket.com/albums/l142/slo4cyl/IMAG0125.jpg

http://i95.photobucket.com/albums/l142/slo4cyl/IMAG0126-1.jpg

http://i95.photobucket.com/albums/l142/slo4cyl/IMAG0133-1.jpg

http://i95.photobucket.com/albums/l142/slo4cyl/IMAG0134.jpg

http://i95.photobucket.com/albums/l142/slo4cyl/IMAG0135.jpg

http://i95.photobucket.com/albums/l142/slo4cyl/IMAG0136.jpg

http://i95.photobucket.com/albums/l142/slo4cyl/IMAG0137.jpg

[AutoMods]

keep up the good work

[JustaGT]

removing those silver bars would make it easier for you to get in and out of your car. and that may save some weight also!

[Domestic Disturbance]

whoa thats not a real street car :afro:

[Ricky]

Well I still haven't had any luck getting a video edited together, my computer isn't able to do anything with mp4s. Drifte has all my footage so Im hoping he gets something together soon. Here are some pics of a couple things Ive been working on this winter.

I have a good computer now and nice editing software. I will try and grab the files from Colton and see what i can do with it when i find time and figure out how to do the basic editing lol.

[slo4cyl]

whoa thats not a real street car :afro:

Ya caught me :fing26:


removing those silver bars would make it easier for you to get in and out of your car. and that may save some weight also!

Damn y didn't I think of that :doh:

[slo4cyl]

I think there are still a couple I haven't gotten to him but hopefully Ill be getting myself a new computer for my birthday :D