PDA

View Full Version : GM Confirms the 2011 Chevrolet Camaro Z28 Is a Go



oVa-Boost
12-21-2010, 11:01 PM
I'm sure lot of you have heard of the new z28 and not sure if anyone has seen this so today when I was searching around the net i found this... Thats going to be one bad z28 I believe its still under testing

http://www.chevroletreports.com/blog/10 ... 28-is-a-go (http://www.chevroletreports.com/blog/1035861_gm-confirms-the-2011-chevrolet-camaro-z28-is-a-go)

Hennessey sweet 705hp HPE700 Camaro ZR1

http://www.yourautostuff.com/performanc ... hennessey/ (http://www.yourautostuff.com/performance/it-fits-camaro-zr1-ls9-by-hennessey/)

69gt4speed
12-21-2010, 11:09 PM
Guess we will see, that's fine w me then Ford can build that new 6.2 up and s/c that and shoehorn that in the stang. Although a e85 5.0 boss engine w say 10/1 compression and a tvs prob do fine.

oVa-Boost
12-21-2010, 11:34 PM
they could but who knows if they will they might just put the 6.2 in there gas powered trucks if they haven't already and e85 fuel will make good power on any engine

85XR7Project
12-22-2010, 07:08 AM
Ford already puts the 6.2 in the Raptor and Super Duty, I think if anything Ford will go direct injection and either supercharge it or turbo the 5.0 since it apparently has all the provisions for direct injection. I would like to see a 6.2 in a Stang though.

Drifte
12-22-2010, 09:08 AM
I'm actually a little surprised the 6.2 motor in the raptor HASNT made it into a stang.

85XR7Project
12-22-2010, 02:27 PM
I'm actually a little surprised the 6.2 motor in the raptor HASNT made it into a stang.
I actually am as well. Sounds like that thing is pretty sweet.

Domestic Disturbance
12-23-2010, 01:26 AM
I'm actually a little surprised the 6.2 motor in the raptor HASNT made it into a stang.
I actually am as well. Sounds like that thing is pretty sweet.
Too expensive. The 6.2 raptors are going above invoice mostly, unlike the 5.4s. No one has that kind of money to burn yet. It'd be a killer swap though

69gt4speed
12-23-2010, 12:10 PM
they could but who knows if they will they might just put the 6.2 in there gas powered trucks if they haven't already and e85 fuel will make good power on any engine

6.2 already in run of mill ford truck engines, there will be some in junkyards after winter. The 6.2 heads flow fairly good as is straight but smallish. Porting them could make some big power. 5.0 flow better stock but u know are 4v. Low 300 cfm intake and 180 cfm exhaust. Like a l92.

Only thing is 6.2 has heavy cast iron block but very stout block wise. Driving my new 5.0 you do not feel the heavy engine up front at all like my old 69 (horrible) or the 03 (bad). I always fought the 69 428 steering the 351w I had was much better. I would expect a 6.2 going 7 litre w custom frame setup w engine setback and 30# boost twin turbo could get w it. Pro mod and 10.5 stuff.

69gt4speed
12-23-2010, 12:29 PM
Oh yea some hope for camaro guys. I was reading where gm was considering next gen of camaro going a smaller platform to save weight, bottom line fleet mpg standards going to be jacked up severely and autos and trucks combined.

So that means gm and esp chrysler gotta do something cause that 300c platform will weigh too much for city mpg. Unless it's alum or something. Even ford will be hard pressed as their trucks are really heavy. There is imo no excuse for that. As long as you known me I always bitched about weight. City mpg it really cuts it down. I like mpg and hi whp and wtq w low weight = kick azz all around. Our site owner knows that for sure. I expect next yr him and Joe duking it out in manual runoff finals.

Domestic Disturbance
12-24-2010, 12:46 AM
Only thing is 6.2 has heavy cast iron block but very stout block wise. Driving my new 5.0 you do not feel the heavy engine up front at all like my old 69 (horrible) or the 03 (bad). I always fought the 69 428 steering the 351w I had was much better.

Hmmm are you saying aluminum blocks are a good idea? Someone should call the General :bigthumb:

Thats good to hear about the next gen platform being smaller, as the engines are becoming more efficient. Gen 5 will be Direct Injected 5.5L est. 450hp.

69gt4speed
12-26-2010, 09:05 PM
^ Hey i am skeptical on any new crap but this 6 bolt setup looks as good or better than the ford gt block or the teksid. Can't argue w a iron block dsm w 50+ # of boost. Just the rest the stuff mostly. Even gm turbo guys use a 5.3 iron setup for very high boost. Ok enough of that, lets see this thing at the ring and imo not impressed that thing looks to be squalling pretty slow maybe I am completely wrong. Ok if a 1/4 mi machine well do that.. instead it's here on a huge track in germany where the zr1 was. Bottom line like the boss 302 at leguna seca we get almost zero in actual data. I'm betting on the boss at the track we gotta just figure out a way Maybe something like I win you drive the 2011 vs the 03 or something at a 45 mph roll. Idk looks to me z28 tears the tires apart like a 03.

http://www.youtube.com/watch?v=C3U9LPSw ... r_embedded (http://www.youtube.com/watch?v=C3U9LPSwlLM&feature=player_embedded)

69gt4speed
12-26-2010, 09:15 PM
Some gay azz stuff w new z28.... wtf is with this, yes I love usa but geez...lol.. Worse than the styx cd ever was. I get it... usa is best first line...

http://www.youtube.com/watch?v=M9GcO2Vz ... re=related (http://www.youtube.com/watch?v=M9GcO2VzimA&feature=related)

69gt4speed
12-26-2010, 09:41 PM
Yea wtf was styx cd and or concert, well I saw them in 73 for $1.02 at k.c. mo. cowtown ballroom then again here when they got big...... pretty good hit at the time.
http://www.youtube.com/watch?v=LKlw-eoZ ... re=related (http://www.youtube.com/watch?v=LKlw-eoZGgo&feature=related)

AutoMods
01-28-2011, 01:00 PM
so is this supercharged z28 a go for sure? got a new motor trend magazine and they mentioned it briefly and sounded like they were assuming it was coming

69gt4speed
01-28-2011, 01:31 PM
Myself idk, Ryan maybe Kitch or someone knows, I always get a feeling from gm anymore they don't wtf to do. Day by day operation.

I will tell you ford v6 engine parts shortage shut down one plant for f150's for a week or so.

oVa-Boost
01-28-2011, 05:43 PM
This is the latest news i'v read so far this was posted Jan 13, 2011

http://www.camaro5.com/2012-camaro-z28- ... to-dealers (http://www.camaro5.com/2012-camaro-z28-production-starts-january-1-2012-confirmed-to-dealers)

Im pretty sure it will come out and there using either LSA or LS9 S/C power plant

Jappbox
01-29-2011, 08:54 AM
january 2012! what long ways away. Hennessy allready put the LS9 from a zr1 in the Camaro, looks factory fresh.

Domestic Disturbance
01-29-2011, 11:06 AM
Production starts next December or January. I forget but its an official date. LSa power (550hp engine from new ctsv). People keep sighting the same 2 blue and red ones they've been testing, both with the black ccw's.

sparkles
01-29-2011, 01:41 PM
january 2012! what long ways away. Hennessy allready put the LS9 from a zr1 in the Camaro, looks factory fresh.

Barret Jackson Oct 2009 Vegas:
http://i282.photobucket.com/albums/kk276/ericksonb06/Vegas/Barret%20Jackson/DSC01458-1.jpg

Domestic Disturbance
01-29-2011, 03:06 PM
I like the ls9 4th gen GMPP did, also looks factory. Still has ac and factory intake
http://i257.photobucket.com/albums/hh221/DD2000SS/SIN%20Performance/HRPT%202010/Picture046.jpg

sparkles
01-29-2011, 03:30 PM
MMMMMM JSB

LT1Dan
01-29-2011, 04:28 PM
I like the ls9 4th gen GMPP did, also looks factory. Still has ac and factory intake
http://i257.photobucket.com/albums/hh221/DD2000SS/SIN%20Performance/HRPT%202010/Picture046.jpg

Everything about that car was sick. I want.

slow ride
01-29-2011, 04:30 PM
Who put the big toaster on top of the intake. I'd take my eggs over easy.