FrankDart, FrankenStang, And Others Fall MFBA Track Rental

[drfast4ward]

http://www.streetfire.net/video/frankendart-frankenstang-and-others-fall-mfba-track-rental_2083401.htm


Great Job Andy There is alot more left in her :)

[StreetSweeper]

CONGRATS THATS FUCKIN AWSOME ANDY!

[Deimos]

Is that with the coilovers Andy? That thing is flying congrats man.

[sparkles]

Is that Vette the one that Scott used to have at ICE?

[drfast4ward]

Is that Vette the one that Scott used to have at ICE?

No that is my vette I turbocharged

[Xboosted23X]

Nice runs.
thats moving for the fox body. And John Force would be proud.

[AutoMods]

Congrats Andy on mid 9's !!!! pretty crazy first time out to the track. whats your setup again?

[Clinical]

fucking awesome

[Scott]

DUDE!! wow I knew it had a good number in it but straight up running mid 9's?!? Shoulda left a little to be found... Congrats man, shit might as well bring that beast to the 10.5 races next year. Good job thats impresive

[c_mart_28]

Impressive to say the least!

[skipdownstairs]

Thanks you guys!! I couldn't have done it without my help from my pit guys and Gal burning the midnight oil the last couple of nights!! The best run of the day was a 9.42 at 147 mph and the out of the box was a 9.95 at 138 mph which kinda took me by surprise I was hoping for a 9 second pass and it happened. Couldn't be happier with the results and had a great time driving the thing lol

Thanks to Trent for the video you put together I'm working on one as well and should have it up shortly......

[Scott]

Looks a little bouncy! good thing you got those double adjustable coilovers

[Drifte]

That was great, sure is bouncy though. Sounds like some tinkering and its going to be even faster. Its great, I'd like to see what it puts down for hp. If you can tell us, what are you running for boost?

[NitrousMike]

good job

[69gt4speed]

:supz: Man what can you say?? Damn I wish I'd been there. Lol at least frankenstang stuck... And thanks for whoever doing the video very nice.. Almost like Huber w his 4 cyl. Usually I don't go for transplants but how can you argue that performance? Guess we will see how long this baby holds up.

[skipdownstairs]

We had 35 psi on it with 11.5 afrs and 18*-19* timing after 5500 rpm which we made adjustments to throughout the day. It was kinda rich around 7000 to 8500 rpms 10.3ish afrs so we leaned that out a bit to 11.5. we ran out of nitrous so we had to quit and we are only spraying the converter nitrous is on at 2050 rpm and off after 4700 rpm best 60 ft was 1.30 but had to abort the pass it got real loose at the 330 hehe:) yaaaaahoooo!!!!

[skipdownstairs]

I was looking through some of the pictures and it kinda looks like it got drug out of a barn with the dust on the hood lol

It was really bouncy the springs are 110 lb springs in the back but are too heavy we need like 85s 0r 90s we raised the front a tad bit and that seem to help also had a tad bit much air in the slicks 12.5 lbs is what we had shouldn't of had pry been over 11.5 lbs but that's learning I guess....

[Scott]

Damn a 1.30 60' would have been a killer pass!! Looks like the rear is actually seperating too much at the release of the trans brake, putting in lighter springs should actually store more energy and allow the rear to seperate easier. I would suggest if anything a heavier spring, the shock settings should make a more noticable difference than spring rate at this point so why not just try stiffening up the extension alot, leave springs alone and see what happens. That does have double adjustables on it right??

[skipdownstairs]

Yes they are double adjustables thank god! We had the exstension all the way soft and it was waaay to much so we went to the center of the adjustment helped a lot!

[85XR7Project]

Take that thing on Hot Rod Drag week they'd love the hell out of that thing.

[AutoMods]

What was the 60ft on the 9.42?