PDA

View Full Version : WTB: Stock ls1 Camaro Manifolds


Sleeping
10-24-2010, 06:45 PM
Just like title says.
AutoMods
10-24-2010, 07:02 PM
i have the drivers side with heat shield. egr port on this mani has a block off plate on it. also has a used outlet gasket that is in good condition that will come with it.

i also have new multilayer steel gm head to manifold gaskets in stock if you need them.

whatever is a fair price or we can trade for the rx7 heater core you have.
Sleeping
10-24-2010, 07:13 PM
Coming to town anytime soon?
FiFdYnUtZ
10-24-2010, 07:22 PM
i have a set, not sure but i think a stud or two is broke off the side that goes to the cats, has EGR and such...
Sleeping
10-24-2010, 07:32 PM
i have a set, not sure but i think a stud or two is broke off the side that goes to the cats, has EGR and such...

Sell just the pass side as long no difference between port size or anything from the one ryan has? I don't need any egr stuff.
FiFdYnUtZ
10-24-2010, 07:43 PM
sure, make an offer
AutoMods
10-24-2010, 08:21 PM
I had a stud broken on a truck manifold and it was a royal bitch to get out. i heated it up and I think i ended up hardening it because then I couldn't drill through it. ended up just selling it as it was but the next guy probably would to have torched it or mill it.

I might go but my wife is for sure going to Elk Run area Wednesday to visit family from 5pm-8pm. I could have her meet you at that Elk run gas station if you want . otherwise I can ship it probably for $12 kind of heavy.
AutoMods
10-24-2010, 10:33 PM
actually i will be up in the east waterloo area on friday also
Domestic Disturbance
10-24-2010, 11:11 PM
I have a set with block off plates on them.
Sleeping
10-25-2010, 07:35 AM
sure, make an offer

Is it the pass side has the broken studs?
FiFdYnUtZ
10-25-2010, 07:42 AM
Just looked and the passenger side has 2 studs and 1 hole that iirc was for a bolt, so it should be perfect
AutoMods
10-25-2010, 08:26 AM
ohh yea, eric you shouldn't have remove the studs. Only reason I did because when i flipped my manifold for the turbo kit the stud was in the way.
Sleeping
10-25-2010, 09:04 AM
ohh yea, eric you shouldn't have remove the studs. Only reason I did because when i flipped my manifold for the turbo kit the stud was in the way.

You get my pm about the y pipe?
AutoMods
10-25-2010, 12:42 PM
emailed you eric
Sleeping
10-25-2010, 06:11 PM
Just looked and the passenger side has 2 studs and 1 hole that iirc was for a bolt, so it should be perfect

Sent you a pm.
Sleeping
10-26-2010, 05:06 PM
Anyone else have passenger side?
Domestic Disturbance
10-26-2010, 09:28 PM
Yup I have both sides
Sleeping
10-31-2010, 10:27 PM
Any one else?
FiFdYnUtZ
11-01-2010, 09:13 AM
Just looked and I also have a set of nice 6.0 truck manifolds..
Sleeping
11-01-2010, 11:19 AM
Just looked and I also have a set of nice 6.0 truck manifolds..

I sent you a pm and never heard from you
FiFdYnUtZ
11-01-2010, 02:13 PM
Shit I didn't even notice, reply sent..
Sleeping
11-03-2010, 09:46 AM
Sent you another pm
Domestic Disturbance
11-03-2010, 02:08 PM
Wow I forgot all about this. I'll see if I can find that manifold tomorrow. Otherwise its probably lost for a few years haha
Sleeping
11-05-2010, 07:04 PM
Wow I forgot all about this. I'll see if I can find that manifold tomorrow. Otherwise its probably lost for a few years haha

Any luck?
AutoMods
11-05-2010, 07:47 PM
post on ls1tech, i'm sure there are lots of them out there
Sleeping
04-30-2011, 04:18 PM
Looking for these again.
Clinical
04-30-2011, 05:28 PM
if you're still looking in like a month, I'll have some
Sleeping
04-30-2011, 10:34 PM
Need sooner than that
Luminatorz34
05-01-2011, 09:25 AM
i have both sides, with cats, no broken bolts/studs
Sleeping
05-01-2011, 09:53 PM
Anyone else?
Luminatorz34
05-02-2011, 12:06 AM
cant wait a day? you got back to me last minute, and i cant just leave work to break the cats off my manifolds. i sent u a pm again