rx7 t72 turbo vs s4 twin turbo

[AutoMods]

My new t72 vs oem s4 turbo. picture doesn't do it justice. the s4 turbo is tiny. even for twins.
http://www.importevolution.com/temp/turbo_t72_vs_s4_front.jpg

s4 hotside is tiny too. the arrow points to the actual snail volume area, the rest of the turbine is big due to internal gate
http://www.importevolution.com/temp/turbo_t72_vs_s4_hotside.jpg

Turbonetics t72 vs PTE 6262 billet vs 50 trim (54mm)
http://www.importevolution.com/temp/turbo_t72_vs_6262_vs_50trim.jpg

battle of the tiny turbos. left side is 13b from an auto 1g eclipse. right side is the audi s4. 13b is larger
http://www.importevolution.com/temp/turbo_13g_vs_s4.jpg

[Ricky]

hahaha! I saw one in Blittles shop and i thought my turbo was small..... the fact that a 13b is bigger is funny as hell!

S4 turbo looks like it would work good for a bike :)

[derek072887]

people do use the s4 turbo's for bikes, more use the rs4 turbo though.... only slightly larger in comparison.... in fact the stock turbo off of an 89 mx-6 gt with the 2.2 SOHC turbo engine is larger than a ko3 (s4) turbo

[Clinical]

jesus, a turbo smaller than the 13b, never thought I'd see it

[Drifte]

people do use the s4 turbo's for bikes, more use the rs4 turbo though.... only slightly larger in comparison.... in fact the stock turbo off of an 89 mx-6 gt with the 2.2 SOHC turbo engine is larger than a ko3 (s4) turbo

I would imagine so, the s4 turbo is working with about 1.3liters or so, the 13g from auto dsm is 2.0l, then you have the 2.2 mx-6. We'll have to get in a stock wrx turbo and compare it to these 2 small turbos, the wrx's is around the same size.

I'll post up the bobcat skid loader turbo later.

[AutoMods]

there is a sale going on now for turbonetic's new billet 64mm wheel. probably flows more than their t66. interesting video here http://www.turboneticstv.com/featured_l ... reset=true (http://www.turboneticstv.com/featured_landing.php?reset=true)

good size for a supra or around 3.0 sized motor. would be really fast on a v8, the 5.7's sometimes run t66's but its smaller than the average camaro guy would run. maybe the 4.6 or 5.0 would be good if they want a fast spooling turbo. laggy on a 4 banger but not unheard of


http://www.importevolution.com/temp/tnetics_billet.jpg

[Ricky]

people do use the s4 turbo's for bikes, more use the rs4 turbo though.... only slightly larger in comparison.... in fact the stock turbo off of an 89 mx-6 gt with the 2.2 SOHC turbo engine is larger than a ko3 (s4) turbo

I would imagine so, the s4 turbo is working with about 1.3liters or so, the 13g from auto dsm is 2.0l, then you have the 2.2 mx-6. We'll have to get in a stock wrx turbo and compare it to these 2 small turbos, the wrx's is around the same size.

I'll post up the bobcat skid loader turbo later.


I have a stock WRX one sitting at home!

[AutoMods]

you should donate it

[slow ride]

Why do you have the k03 or 13b?

[AutoMods]

A pair of k03's was in the garbage at brian little's shop so Colton grabbed them. I'm not sure whats wrong with them if anything. i know one turbine to chra bolt is stripped out. the 13b is shot, came off of one of colton's parts cars.

I'll probably send the turbos through a parts washer and keep them in the office as a conversation piece. maybe drop them off at the powder coating guy next time i'm there.

[derek072887]

jesus, a turbo smaller than the 13b, never thought I'd see it

the upgrade for the ko3 which is the ko4 lol is still smaller than a 13b....