ford motors (cheap)

[sLoWnStEaDy]

Need these damn things gone!

'87 302, bored .040 over 20K~ miles on it. two ears are broken off. $100

D4AE block, crank, pistons, rods, cam etc... $100 (probably needs bored a little)

D9AE 351W, 40K in rebuild pretty much complete wit alt, A/C, P.S. etc.. $250

C4 with aftermarket T.C. (IDK anythign about the TC at the moment) $150

300cu.in. inline six, needs 3 pistons, mostly there though... $50

3.4L DOHC (LQ1) engine block, front cover and crank. $75


or you can take it ALL for $350! I have more stuff than listed but I don't know everything I have so... SOMEONE PLEASE COME TAKE THIS STUFF! Sperry's said he won't be able to take it until early February and I REALLY don't want to wait that long to get this shit out of my garage!!!

[Clinical]

I may have someone interested in the complete 351W

He just wants to know if it definitely has everything?
He just texted me again asking about wiring and such

[sLoWnStEaDy]

I may have someone interested in the complete 351W

He just wants to know if it definitely has everything?
He just texted me again asking about wiring and such

it has everything.. no real "wiring" though as it is an old carb motor, I know it has a little harness coming off the dist. and the wire off the starter as well. exhuast manifolds, starter, alt, P.S., think the A/C is out there, fan with a 2" spacer etc... everything but a carb. jackasses painted it black and orange for some reason...


heres a pic of it back when I got the car, carb is gone though
http://www.imagechicken.com/uploads/1264568837027303200.jpg (http://www.imagechicken.com)

[Deimos]

Lol trade ya the 351 for an accel dfi. I'll even throw in some old ford tranny.

[sLoWnStEaDy]

Lol trade ya the 351 for an accel dfi. I'll even throw in some old ford tranny.

no idea what that is (distributor?) but PM me if you want. If it is a dist. and will work on a 5.0HO (I have a steel gear) I am interested as I am running a "ProComp" HEI in the RX7 right now. Whats the trans? I can toss that in the rafters with my other stuff atleast

unless someone shows up with cash first...

[85XR7Project]

I realistiscally just cannot afford anything right now. I was trying to get at least that 351W and C4 but we cannot afford it right now...

It was a damn good deal too...

[sparkles]

Lol trade ya the 351 for an accel dfi. I'll even throw in some old ford tranny.

I'm still waiting on pics, lol.

[Deimos]

lol I know waiting on a cmera my phones touch screen no worky

[sLoWnStEaDy]

someone must need something... Taking offers!

[Clinical]

I think my buddy wants the 351, he wants to know if you'd take 200 for it?

Pm me your number or something and I'll have him get ahold of you about it.

[sLoWnStEaDy]

Yeah, I'll take $200 for the 351W...

319-241-4059, Keith

[Clinical]

Yeah, I'll take $200 for the 351W...

319-241-4059, Keith
Okay he'll probably be contacting you

[sLoWnStEaDy]

Not sure if your buddy has tried to get a hold of me... my phone was off for a couple days but its back on and everything now so...

[Clinical]

Alright I'll try to get a hold of him.

I don't see him or hang out with him much, just let him know at the college if i see him and on facebook

[sLoWnStEaDy]

C4 is sold....

Bump! Everything that is left for $300 cash!! that is a complete, rebuilt 351W, a rebuilt 306/307 long block (302 bored .040 over), and a tore apart 351W.

[sLoWnStEaDy]

306 for $100 and the tore apart 351W stuff for $50

[85XR7Project]

Did you get rid of the rebuilt 351w? If not I'd like to make you an offer.

[sLoWnStEaDy]

Did you get rid of the rebuilt 351w? If not I'd like to make you an offer.

still have it...

[85XR7Project]

Would you be willing to take $150?

[sLoWnStEaDy]

If you can pick the SOB up today I will take $150. Otherwise price goes up $5 a day ;) I want this shit gone!

319-241-4059

[Clinical]

If you can pick the SOB up today I will take $150. Otherwise price goes up $5 a day ;) I want this shit gone!

319-241-4059
If you don't sell it I think my friend wants to come up monday to get it.

I'll let him know it's still for sale, idk if he'll actually finally follow through or not.

[sLoWnStEaDy]

If you can pick the SOB up today I will take $150. Otherwise price goes up $5 a day ;) I want this shit gone!

319-241-4059
If you don't sell it I think my friend wants to come up monday to get it.

I'll let him know it's still for sale, idk if he'll actually finally follow through or not.

today only I'll do $150 to whoever wants it. but that means PICKED UP today and out of my dang garage! :bigthumb:

[Clinical]

i doubt he'd be able to come up today so he'll probably have to go with whatever you'll do monday if he comes up

[sLoWnStEaDy]

i doubt he'd be able to come up today so he'll probably have to go with whatever you'll do monday if he comes up

OK. monday will be the same price we (me and your friend) discussed before if I still have it here.

[85XR7Project]

It will be, there is no way I can get out there today. If it falls through my $150 cash still stands.

[85XR7Project]

On a side note what all do you know about the 306? Is it just an old 5.0 HO engine or is it a little more than that(Other than being bored out)?

[sLoWnStEaDy]

On a side note what all do you know about the 306? Is it just an old 5.0 HO engine or is it a little more than that(Other than being bored out)?

I don't know anything about it really. I didn't even know it was bored until an IAF member came to look at it and noticed the .040 marked on the pistons LOL...

I can pull the oil pan and timing cover, see what it has for rods and a cam. I know it is a pretty fresh motor as the cross hatching is still VERY visible and looks really recent. Also, I sent you a PM

[85XR7Project]

Responded, I may take that off your hands instead as I have most of what I'd need to complete it but I sent you a PM regarding my schedual.

[sLoWnStEaDy]

Back at you... I am going to the garage right now to see what I can find out...

[85XR7Project]

Tell you what, I will take one or the other on Saturday guaranteed I called a buddy to have him come with so its going to happen for sure. I'll PM you my number that way you can get a hold of me if you need to.

[sLoWnStEaDy]

306 is sold to the guy above me! now lets get this 351W out of here! I got rid of the chevrolet orange that was all over it. honestly I just blasted it with some flat black VHT (up to 2000*) ceramic header paint I had laying around...

[sLoWnStEaDy]

holy shit... someone that said they where coming to get something ACTUALLY DID... LOL

306 is gone, gave him the 351W block as well so the only thing left now is the rebuilt 351W.

[sLoWnStEaDy]

BTW, nice meeting you man. Sorry if I talked your ear off, I don't don't ever get around car guys, or any guys for that matter. Just my 3 year old and Skye so, when I get the chance to talk I take advantage of it!! LOL

[85XR7Project]

BTW, nice meeting you man. Sorry if I talked your ear off, I don't don't ever get around car guys, or any guys for that matter. Just my 3 year old and Skye so, when I get the chance to talk I take advantage of it!! LOL

Nah man I had a good time shootin the shit with ya, would have liked to stick around a while longer but I had to get home. I'll have to get together with you sometime or somethin.

[sLoWnStEaDy]

BUMP!!! I still have the 351W, all of the misc parts (cranks, pistons, rods, cams, wired, valve covers etc...) are out back sitting outside if anyone wants some free scrap metal or something, it was all usable when I put it outside but that was like 3 weeks ago so LOL...

351W is still complete and sitting in my garage nice and safe. $200

[85XR7Project]

I forgot to grab that tub o shit when I was out there, I felt like an idiot after getting home. Either way, I hope you get that 351 sold.

[sLoWnStEaDy]

I forgot to grab that tub o shit when I was out there, I felt like an idiot after getting home. Either way, I hope you get that 351 sold.

I hope the dang thing sells too! I got my garage all cleaned up and this motor is sitting up under the bench where those ugly as spokes where at so at least it isn't in my way anymore. I am thinking I will hook it up to the RX7 stuff and see how she runs, might buy something to drop it in and then sell or just find a truck with a bad motor as I still don't have a truck... Unless it sells first of course...

[85XR7Project]

Yeah it could end up being a good deal or a bad deal there if the RX7 has a hard time hooking up now it may end up being harder to keep traction with when the 5.8 went in but it WOULD be fun as hell. I'd keep it around ya never know when you'd want to throw it in something.

[sLoWnStEaDy]

Yeah it could end up being a good deal or a bad deal there if the RX7 has a hard time hooking up now it may end up being harder to keep traction with when the 5.8 went in but it WOULD be fun as hell. I'd keep it around ya never know when you'd want to throw it in something.


well, the tires I was running are the tires that are on it when you seen it. LOL, not sure if you noticed but they where on the car when I bought it in like 2006, and I think they needed replaced back then! Some cheap 'ole Wal-Mart brand tires IIRC, M+S is the brand I think...? First time I hooked I blew the T5 to pieces so... I have no idea what that dang thing will do if everything goes right.