91 talon TSI AWD low miles (67,9xx)

Okay I'm going to relist this car.

http://s249.photobucket.com/albums/gg23 ... ed%20park/ (http://s249.photobucket.com/albums/gg232/PIMking/talon%20at%20weed%20park/)
its a 1991 eagle talon awd turbo with 67k original miles. 5 speed.


The vehicle has no rust. but some small dings on the passenger side couple of chips in the hood and rear bumper chiped. great condition for being a 91

I Just replaced the ecu and had it cleaned and socketed and the caps replaced. Its good as brand new.


The bad

The oil filter housing needs changed (I have the part and gasket)


drivers leather seat has a tear.


Now before you say $4500?!?!?! there is over 10k in this car. So if your willing to invest a little bit of time and money it will be a great deal for you. The main reason why I am selling this Is that I am moving down to Alabama later this month to go to school so I need to get rid of this car.


Mods::
Team rip stage 3 trans $2600
http://www.teamrip.com/DSM_AWD_STAGE3_R ... RVICE.html (http://www.teamrip.com/DSM_AWD_STAGE3_REBUILD_SERVICE.html)


Fidanza 3.2 clutch 339.99
http://www.maperformance.com/fidanza-3. ... t-dsm.html (http://www.maperformance.com/fidanza-3.2-kevlar-clutch-kit-dsm.html)


Fidanza flywheel 189.99
http://www.maperformance.com/fidanza-al ... 61691.html (http://www.maperformance.com/fidanza-aluminum-lightweight-flywheel-dsm-awd-6-bolt-161691.html)


Punishment racing Front mount intercooler. 399.99
http://stores.punishment-racing.com/-st ... Detail.bok (http://stores.punishment-racing.com/-strse-2/dsm-fmic-kit-talon/Detail.bok)


Siemens 750cc injectors $200


Walbro 255lph hp fuel pump $91.99
http://www.maperformance.com/walbro-255 ... x-sti.html (http://www.maperformance.com/walbro-255lph-high-pressure-fuel-pump-install-kit-dsm-evo-wrx-sti.html)


Dsmlink version 2.5 $599 this is a computer controller like a safc but 100x better
http://www.ecmtuning.com/product_info.p ... 0csfmbsl62 (http://www.ecmtuning.com/product_info.php?cPath=25&products_id=36&osCsid=bcittllevg1kcmk80csfmbsl62)


Fuel lab adjustable fuel pressure regulator w/ gauge $208.99
http://www.maperformance.com/fuelab-adj ... t-dsm.html (http://www.maperformance.com/fuelab-adjustable-fuel-pressure-regulator-with-install-kit-dsm.html)


Megan 2" lowering springs $119.95
http://www.extremepsi.com/store/custome ... e=1&veh=1G (http://www.extremepsi.com/store/customer/product.php?productid=20740&cat=262&page=1&veh=1G) DSM


DME camber kit $55 (rear)
http://www.extremepsi.com/store/custome ... e=1&veh=1G (http://www.extremepsi.com/store/customer/product.php?productid=17436&cat=262&page=1&veh=1G) DSM
Oreilly auto parts camber kit for the front was $22


KYB GR-2 front struts/shocks $129
http://www.extremepsi.com/store/custome ... e=1&veh=1G (http://www.extremepsi.com/store/customer/product.php?productid=18038&cat=262&page=1&veh=1G) DSM


KYB GR-2 rear shock/sturts $109.95
http://www.extremepsi.com/store/custome ... e=1&veh=1G (http://www.extremepsi.com/store/customer/product.php?productid=18037&cat=262&page=1&veh=1G) DSM


Inovate LC-1 wideband sensor and gauge $220


Megan 3" down pipe $142.99
http://www.maperformance.com/megan-raci ... d-fwd.html (http://www.maperformance.com/megan-racing-3-downpipe-1g-dsm-89-94-awd-fwd.html)


Forced perfomance race exhaust manifold $198.99
http://www.maperformance.com/forced-per ... d-dsm.html (http://www.maperformance.com/forced-performance-race-exhaust-manifold-dsm.html)


MHI (mitsubishi heavy industries) 16g turbo $579.99
http://www.maperformance.com/true-mhi-1 ... arger.html (http://www.maperformance.com/true-mhi-16g-turbocharger.html)


So far that $6206.83


I didn't add the black out covers that were $175 or the 17" custom wheels that were over $600.


So you can see just on what I have in the car its a steal for someonE.


I will leave the wheels and sony cd player with pioneer speakers.


This is a cash deal only no checks just cash.


you can email me at iancjens@yahoo.com


I forgot a few things too (its hard to remember all this stuff)


aem tru time adjustable cam gears $351.99
http://www.maperformance.com/dsm-engine ... gears-aem/ (http://www.maperformance.com/dsm-engine-components-and-cooling-cylinder-head-and-camshaft-components-adjustable-cam-gears-aem/)



Comp 100200 cams $444.99
http://www.maperformance.com/comp-sever ... hafts.html (http://www.maperformance.com/comp-severe-competition-camshafts.html)


Brian crower Stainless steel valves 302.99
http://www.maperformance.com/brian-crow ... m-evo.html (http://www.maperformance.com/brian-crower-stainless-steel-valves-dsm-evo.html)


revised lifters (bigger oil ports for less noise) $109.99
http://www.maperformance.com/topline-re ... m-evo.html (http://www.maperformance.com/topline-revised-lifters-dsm-evo.html)



Thats a total of $8,184.79 Invested.


selling for almost half of that.


Here are some more recent pics





I would like to have cash only

Price is 4000 firm. Not selling for any less.

[Clinical]

Wish I had the money, I'd be all over it

[sLoWnStEaDy]

might help to put this in the right section....

[Drifte]

You should sell me those wheels, for sure.

[Jappbox]

Might help if you have some under the hood pics??? and what do you have for a MAF... I take it you never got it "tuned"

I have the maf tuned. Its a stock 1g maf with the silencers taken out. It needs a tune

I spent some time with the car today. changed the oil filter housing. Changed the oil. Flushed the coolant.

I wanted to take care of that before I let it go. I just felt bad pushing a simple problem on someone else.

[bowtiebuba]

underhood pics?

[Jappbox]

That is prob your whole tuning problem he 1G MAS... You should have got a 2G one or a GM Blow through setup. 1G mas maxes out right away

SOLD!

[Clinical]

So, what are you getting now?

[Drifte]

darn, wanted some wheels. Good for you though, was a nice car.

So, what are you getting now?
89 lx hatch with a 358ci FI

e303 cam
gt40 heads
gt40 intake
Fiberglass hood with a cowl (not sure on the size)
Fiberglass hatch.
Traction bars
70k on the body
1k on motor
1k on trans
tremec t5
Short throw shifter
ford racing clutch.

I do need different wheels. It has those stupid phone dial wheels.

I have a trailer lined up to trailer it up to joliet but I cant get it until monday.

I am thinking about borrowing a truck and renting a trailer from uhaul for $50 and bring it up there.

Its a sad day that was a pretty clean car.

[black88gt]

358 w/ gt40s?

i can hear it choking from here. heads should be your first mod.

I'm going to leave it be for awhile. He has a dyno chart for the car but I can't remember the exact numbers but high 300 range to the wheels. Its just goint to be a put put machine.

[97danger]

358 w/ gt40s?

i can hear it choking from here. heads should be your first mod.


Actually gt40s are the highest flowing, best horsepower factory sbf head ever made other then origional boss motors. The only thing I hear that 358 doing is breathing perfectly with instantanious throttle response, nice lopey idle, and almost 400 ponies! The only choking i hear is you coming up with one legitimate reason why gt40s shouldnt be on a windsor

[black88gt]

stock for the lose maybe thats why

a majority of box stock aftermarket heads will outflow gt40s. send them to thumper and theyre almost on par.

[97danger]

First of all, this is a daily driver that knocks down 21mpg with ur foot out of it and runs low 12s on et streets. This isnt an all out street strip car nor built for maximum power. Its a daily fucking driver! How can u possibly compare a factory casting(even those fully worked my thumper performance), to an aftermarket head? I can pick up gt40s all day long for 100 bucks a set. Lets see you buy afrs, trick flows, or edelbrocks for that! Or any other aftermarket heads for that matter! Not everyone dumps everything they have into every car they have. This car is built for fun and cruisability and those gt40s flow just fine for 425 hp and under. We know how to build cars in muscatine! If youd like to argue with that, you can drive ur car to muscatine, and find out for urself! Hope you dont mind getting walked all the way down the 1320!

[black88gt]

100 bucks a set is hardly the going rate on a set of gt40s haha. Shit if someone handed me some AFRs for free I wouldnt say the normal price is $100. Better throw all those 100 dollar gt40s online and make some cash.

GT40s arent normally as budget as they appear after a valvejob and other freshening, especially w/ Ps.

302 parts make 302 power and thats the long story short.

I could give a shit less about going to Muscatine. You're getting butt hurt and Im not sure why.

For one this is a 358ci and the heads are ported and polished with a valve job.