2008 RE XXX 15" D2

[sLoWnStEaDy]

doubt there will be any real interest around here but figured WTF, you never know...

As the title states, I am switching my system up yet again. For sale is my 2008 model RE XXX 15" subwoofer with D2 coils. It is in 100% PERFECT working order and cosmeticaly not too bad. the cone and surround is all perfect, but due to poor packaging by the person i got it from, there are some chips and such on the outer edge of the baskets mounting surface. I have it in a flush mount box and you cannot tell AT ALL so it is really no big deal.


Mounting Depth - 13.5"
Mounting Hole Diameter - 14.5"
Overall Diameter - 16"
Bolt Hole Circle - 15.25"
Motor Width - 10.5"
Motor Depth - 5"
Basket Depth - 8.5"
Displacement - 0.27 cu. ft.
Weight - 76 lbs.

Electrical Q Value -Qes: 0.58
Mechanical Q Value -Qms: 3.62
Total Speaker Q Value -Qts: 0.501
Free Air Resonance -Fs: 19.10 Hz
Equivalent Compliance -Vas: 207.0 liters
One-Way, Linear Excursion -Xmax: 54 mm
Efficiency -SPL 1W/1m: 85.81 dB SPL
Effective Piston Area -Sd: 810 cm^2
DC Resistance -Re: 4.2 ohm
Nominal Impedance -Znom: Dual 2 ohm
Thermal Power Handling -Pe: 2000 W
Force Factor -Bl: 18.16



Tryin to sell it quick so $400 FIRM! If you find one for less let me know so i can buy it :bigthumb:

[sLoWnStEaDy]

Bump!! you cheap bastards :bigthumb:

[Drifte]

My trunks to small sorry bro.

[sLoWnStEaDy]

It only needs 4ft^3 ported even less sealed...


I put it up on ebay so hopefuly... Ordered a wicked recone from TeamPSI for my Atomic APXX motor. will be about 4kw rms tuned to about 40hz in roughly 5ft^3, last one did 145~ and that was on about 2k watts with no sound deadening, no electrical upgrades, no rear deck porting etc.... So this one should hopefuly get me closer to 148+ we'll see what happens

[sLoWnStEaDy]

Got a bid on ebay so it looks like whe will be goen for sure...

Drifte: shot you a PM about a box design may be...